devnull 0 Posted May 15, 2004 Does anyone know if the crank bearings are all the same or if they're all different? I have them all lined up according to where they came from, but they're all a bit worn and I am going to replace them. I just wanted to know if there's anything I need to look out for when replacing them. Thanks! :D Quote Share this post Link to post Share on other sites
PhatVR6 0 Posted May 15, 2004 renew the botls too Quote Share this post Link to post Share on other sites
dazzyvr6 0 Posted May 15, 2004 and put some oil on the bearings before fitting aswell... Quote Share this post Link to post Share on other sites
Kevin Bacon 5 Posted May 15, 2004 White metal bearings should be assembled with a special run-in grease, it's normally red. It protects them during the first few cycles until the oil pressure builds up, but shed loads of oil will suffice if you can't get the grease. K Quote Share this post Link to post Share on other sites
devnull 0 Posted May 15, 2004 Thanks for all the extra info, I truly appreciate it. :D My other question still stands though, are they all the same or is each one specific to that section of the crank in terms of shape, weight, size, etc? Quote Share this post Link to post Share on other sites
