phaserno1 0 Posted May 27, 2004 How come on the VR’s the nut holding the steering wheel on a different size from the G60? Or any other cars come to that. I went to put a new wheel on at the week end and the normal 4 cross brace didn’t fix on any of them lol… very odd every other car seem to fit one of the 4… :D Quote Share this post Link to post Share on other sites
Kevin Bacon 5 Posted May 27, 2004 Is the G60 different then? All my MK2s and my VR all use a 24mm nut. Quote Share this post Link to post Share on other sites
PhatVR6 0 Posted May 27, 2004 All the VW's I have use the same size nut too.... Quote Share this post Link to post Share on other sites
Kevin Bacon 5 Posted May 27, 2004 And I only know that because I had to adjust it after I my tracking! Quote Share this post Link to post Share on other sites
stel g60 0 Posted May 27, 2004 my mk1 had a 24mm nut too, maybe the brace you were using before was for tractors :) Quote Share this post Link to post Share on other sites
phaserno1 0 Posted May 27, 2004 thats odd then as mine is a bigger nut guys ummm, i could get my m8's g60 off with it but not mine. Just puzzled me thats all Quote Share this post Link to post Share on other sites
Kevin Bacon 5 Posted May 27, 2004 Shouldn't worry about it. Chances are someone has replaced the nut at some point but couldn't get one in 24mm size, but the thread will be OK. Grab the proper nut from a scrappy next time you're at one. Quote Share this post Link to post Share on other sites
phaserno1 0 Posted May 27, 2004 Ok chaps, was just wondering thats all, can anyone help with this one tho http://the-corrado.net/.archive/forum/viewtopic.php?t=10801 :D Quote Share this post Link to post Share on other sites
