VR6 ENGINE PARTS - BLOCKS,HEAD,CRANK Etc. - No Longer Available

[iceviolet 0]

VR6 ENGINE PARTS - BLOCKS,HEAD,CRANK Etc.

 

Bottom End Rebuild Parts:

2.8 Bare Block Ideal for re-bore to accept 2.9 pistons. This block came from a 1997 golf vr6. For Information I did a rebuild a few years back and the boring to 2.9 cost me 120 plus vat. -40

2.9 Block with worn bores Contains a very good crank shaft can be removed on request if the block is not needed. This engine was in my Corrado originally and suffered from bore wear, the crank is in great shape though. Comes complete with crank pulley and chain gear, Oil Pump and drive gear, Chain cover and front chain cover. - 100

Set of good 2.9 pistons, these were measured up a couple of years ago when removed and they were spot on, very little wear to skirts and well within tolerances. Need a good clean that's all. -100

Spare crank not measured up ideal for a re-grind - 20

Sump 25

VR6 Piston Installation Tool -10

Full set of genuine Main Bearings. - 60

3 sets of genuine Piston Rings 60 (You will require a further 3)

Ideally I would like to sell the above items as a package. If so I can do all the lot for 300 collected.

 

Top End Parts:

Cylinder head This was a rebuilt head a few years ago, was fitted to my original engine for a couple thousand mile then removed when I did the complete engine rebuild. Been sat in the garage since, comes complete with cams and sprockets and tappets were new when installed too. Personally would just strip down and clean then rebuild - 100

Uprated Valve Springs Brand new in packaging - 60

Vr6 Engine Loom - 30

Alternator Bracket is very clean been shotblasted - 15

Alternator,Dipstick, Inlet manifold, Exhaust manifolds, Oil filter housing, Oil Cooler, Thermostat housing and sensors, Heat Shield - 50

Fuel rail, Injectors and 4Bar Fuel regulator - 50

Front Engine Mount Been shotblasted and re-painted - 15

Rear Engine Mount Been shotblasted -15

Gearbox Mount Been ****blasted -10

Crank Pulley x2 - 15 each

Altenator Bracket - 10

Also have a CCM Gearbox from a golf vr6 - 50

 

If You would like everything as a job lot then make me an offer.

Lots of other bits and pieces engine related so just ask.

 

Cheers, Sam

 

 

List Date: 4/7/2014

Location: West Yorkshire, United Kingdom

 

For more info, click here to view the original listing: VR6 ENGINE PARTS - BLOCKS,HEAD,CRANK Etc.

--------------------------------------

This item is no longer available.

 

--------------------------------------

 

Mobile friendly version: VR6 ENGINE PARTS - BLOCKS,HEAD,CRANK Etc.

[vr6paul 0]

Hey there, any chance of posting alternator assuming it was working well? Thanks

[Hofmiester 10]

Hi mate,

Could I have the rear engine mount please?

[Hofmiester 10]

Also, any ideas how many miles the gearbox has on it?

[Jim Bowen 1]

Interested in the 2.8 block, Piston tool, Main bearings, piston rings.

 

A bit far away from me to drive to collect though.

[iceviolet 0]

Hey there, any chance of posting alternator assuming it was working well? Thanks

Hi, I could post yes, The alternator was in good working order when removed a few years ago and has been sat on a shelf in my garage since. Its going to be £20 posted.

 

Hi mate,

Could I have the rear engine mount please?

 

Yes no problem, do you require this posting? Going to be £20 posted for this also.

The gearbox came from a golf I bought to break, big ends were shot but the car did still drive and there was no problem with gearbox that I was aware of. Car had about 100k on IIRC.

[iceviolet 0]

Interested in the 2.8 block, Piston tool, Main bearings, piston rings.

 

A bit far away from me to drive to collect though.

 

Yes Essex is a fair way from Yorkshire. How much is it to send a pallet these days?

[Jim Bowen 1]

How much does it weigh?

 

I have been using parcel2go website recently and it's been decent.

 

sent 22kg box of coilovers for about £8-£20 depending on the courier you pick. They collect it fun you.

The head I just received cost £40 I think. But that included insurance due to the value.

[clumpy1 11]

Yes Essex is a fair way from Yorkshire. How much is it to send a pallet these days?

Paisley freight

[Hofmiester 10]

Hi, if you can Pm me payment details for the rear engine mount, that would be great. For the gearbox, I am tempted as I want to get mine refreshed with new syncros and a shorter final drive but this would allow me to get it done without having the car off the road for ages.

 

However postage is going to make it pricey, Where are you in West yorks? I am in Newcastle so may be able to come pick it up.

 

Cheers

 

Ron

[vr6paul 0]

Hi, I could post yes, The alternator was in good working order when removed a few years ago and has been sat on a shelf in my garage since. Its going to be £20 posted.

 

 

 

Yes no problem, do you require this posting? Going to be £20 posted for this also.

The gearbox came from a golf I bought to break, big ends were shot but the car did still drive and there was no problem with gearbox that I was aware of. Car had about 100k on IIRC.

 

 

Damn just arranged for alternator to be sent for double that (a reply to my wanted ad). I should have heald off never mind.

Thanks anyway

[jimcarp 10]

Hi mate, main bearings for me please. Pm'd Thanks Jim

[iceviolet 0]

Hi mate, main bearings for me please. Pm'd Thanks Jim

 

No problem!

 

That's the main bearings and valve springs gone to jimcarp

[easypops 8]

Damn just arranged for alternator to be sent for double that (a reply to my wanted ad). I should have heald off never mind.

Thanks anyway

 

Hi,

If the alternator is available at £20 posted, I'd like to take it please :)

 

Thanks

Martin

[iceviolet 0]

Hi,

If the alternator is available at £20 posted, I'd like to take it please :)

 

Thanks

Martin

 

Yes still available, yours if you want it, PM me postage details please

 

cheers

[Jim Bowen 1]

No problem!

 

That's the main bearings and valve springs gone to jimcarp

 

Oh well thats nice, i did say i'd take them on the first page.

 

Never mind.

[iceviolet 0]

Oh well thats nice, i did say i'd take them on the first page.

 

Never mind.

 

I am sorry about that, but you only said you were "interested" in them and that's as far as it went. I had no further communication about the items you wanted so assumed you must not be interested anymore.

 

Jimcarp was the first person to say he would 100% take them and I am sure that was the forum rules or at least used to be.

[Jim Bowen 1]

I Thought you were going to see how much postage would be for all the bits. Just a misunderstanding I guess. No worries.

[stu37 0]

Hello mate do you still have the inlet manifold for sale?

[iceviolet 0]

Hello mate do you still have the inlet manifold for sale?

 

Hello,

I only have a lower manifold available.

[jimcarp 10]

Hi,

Will take piston ring tool if still available!?

[iceviolet 0]

Hi,

Will take piston ring tool if still available!?

 

Yep, All yours mate.

[voo51 0]

Hi. How much for the oil filter housing. Alternator bracket. Thermostate housing and sensors posted?

[voo51 0]

Plus chain covers (if youre willing to split frim the rest)

[jimcarp 10]

Thanks, mite aswell put my name down for remaining mounts if they havn't already found another home. Will speak on your return. Thanks mate, have a gudden