Supercharged 2 Posted April 29, 2014 Some of my PAS pipes are not looking too clever... anyone replaced any recently or found an aftermarket supplier / solution? Quote Share this post Link to post Share on other sites
VR6 South 0 Posted April 29, 2014 I have the same problem as My PAS has a slight leak which I cannot trace at the moment. Do you know how many pipes are in the system and whether they are still available. Sorry to partially hijack your thread. Quote Share this post Link to post Share on other sites
Yandards 0 Posted April 30, 2014 Guy on ebay used to do them, although I think they were just the hybrid brake lines with the correct attaching bits and painted silver. Reasonable quality I replaced both the 16vG Quote Share this post Link to post Share on other sites
Supercharged 2 Posted April 30, 2014 Yan, thanks yeah I have some of them and they're a good enough match but it's the bigger flexi lines I'm now looking at, the rubber is ok but the ends are in a bit of a state... VR6 South - basically you have a high and low pressure side, resevoir - pump - rack. Quote Share this post Link to post Share on other sites
VR6 South 0 Posted April 30, 2014 Yan, thanks yeah I have some of them and they're a good enough match but it's the bigger flexi lines I'm now looking at, the rubber is ok but the ends are in a bit of a state... VR6 South - basically you have a high and low pressure side, resevoir - pump - rack. Thanks. Any links to the seller please? Quote Share this post Link to post Share on other sites
KipVR 1 Posted July 4, 2014 Might be quite expensive, but Pirtek will probably make some up for you on site. Quote Share this post Link to post Share on other sites
