The_Dude 0 Posted May 12, 2014 (edited) Cupboard clearout - loads of parts inside Contact me via PM for quickest reply. Prices do not include postage, photos available on request as I can't be arsed resizing them in this new, wonderful for sale section that we have. :( Drivers air vent housing 10 Passenger air vent housing 10 Passenger air vent 8 Centre vent (passenger side ) 8 Centre vent (driver side with hole cut for standard gauge) 10 Driver vent 8 Driver vent (hole cut for gauge) 10 Bonnet cable with handle 5 Speedo surround 5 Curved inlet pipe 5 Offside fog 30 Offside fog/indi housing 10 Offside indicator (glass chipped and loose) 10 Drivers fog 30 Drivers indicator (chipped) 20 Drivers fog/indi housing 10 Crack pipe 5 Drivers mirror, moonlight blue 15 Black plastic cover that goes by the mirror but I don't know what its called (1driver 2 passenger I think) 3 each Fuel filter 5 Oil cooler 5 CL pump and loom 5 Brake fluid reservoir 5 Washer fluid reservoir 5 Power steering fluid reservoir (no cap) 5 Passenger roof grab handle 3 Plastic spark lead guide (2,4,6) 3 Stack mechanical boost gauge 20 Aux belt tensioner 10 Passenger dash undertray 10 Drivers dash fuse box tray 10 Kick panel 10 Another kick panel 10 Thermostat housing with sensors 10 Power steering pump 10 Starter motor 20 Coilpack 30 Random cooling pipe 5 Dashboard 30 Ashtray (used) 5 Heater Loom 5 Wiper Loom 5 ABS Loom 5 Early passenger speaker cover (tabs intact) 15 Interior door handle surround both sides 3 each Wiper motor and linkage 15 Gearstick surround & boot 10 Centre tray (that gearstick surround clips into) 10 Late standard speaker door tray with speakers, both sides 10 each, 15 pair Steering column surround 5 Window controller ecu 10 16v badge (flat back) 15 Behind dash heater pipes (all 3) 5 2.5" Stainless Powerflow exhaust, oval tailpipe decat (still managed to pass emissions!) 3 slat badged grill (2 closed) 125 Collection only. Centre console 2 heater tabs broken just wedge it behind and it stays there, small hole and crack in bottom storage bit. 30 Speedline centre cap, one tab broken 10 List Date: 5/12/2014 For more info, click here to view the original listing: Cupboard clearout - loads of parts inside -------------------------------------- This item is no longer available. -------------------------------------- Mobile friendly version: Cupboard clearout - loads of parts inside Edited May 12, 2014 by The_Dude Quote Share this post Link to post Share on other sites
EmGreenVR6 0 Posted May 12, 2014 If it's late model, driver's fog please. And Speedline centre cap, thanks. I can pay via paypal, not sure how the classified thing works... Emma Quote Share this post Link to post Share on other sites
EmGreenVR6 0 Posted May 12, 2014 Sorry, meant to say if PayPal is easier for you. If not then I'll use the forum thing. Quote Share this post Link to post Share on other sites
easypops 8 Posted May 12, 2014 Offside fog/indi housing 10 Drivers fog/indi housing 10 Are these late and fully intact? If so I'll take them please, posted to Glasgow. Oh and if so, how did you get the fog lights out? Cheers Martin Quote Share this post Link to post Share on other sites
pauly2850 0 Posted May 12, 2014 Bonnet cable and offside fog please Quote Share this post Link to post Share on other sites
The_Dude 0 Posted May 12, 2014 Offside fog/indi housing 10 Drivers fog/indi housing 10 Are these late and fully intact? If so I'll take them please, posted to Glasgow. Oh and if so, how did you get the fog lights out? Cheers Martin uhhhh, might have screwed up here. I didn't actually check to see if they come out and it looks like a real ballbuster. Sorry dude, going to have to deny you this one as the fogs are pretty hot right now. Quote Share this post Link to post Share on other sites
seanl82 23 Posted May 12, 2014 Is the abs loom for a vr6 and intact and uncut? I assume this is full loom for pump/abs ecu/abs light/fuse box? If so, how much posted please mate. Quote Share this post Link to post Share on other sites
VAG-hag 0 Posted May 12, 2014 Jim do you have the water hose with the one way valve near the throttle body? Quote Share this post Link to post Share on other sites
The_Dude 0 Posted May 12, 2014 Jim do you have the water hose with the one way valve near the throttle body? Sorry Chris, don't have it. Quote Share this post Link to post Share on other sites
easypops 8 Posted May 12, 2014 uhhhh, might have screwed up here. I didn't actually check to see if they come out and it looks like a real ballbuster. Sorry dude, going to have to deny you this one as the fogs are pretty hot right now. Boooooo :lol: No worries mate Quote Share this post Link to post Share on other sites
stuarttaylor37 13 Posted May 12, 2014 Black plastic triangle cover that goes by the mirror but I don't know what its called (1driver 2 passenger I think) 3 each Are these for the inside or outside of the door please? Quote Share this post Link to post Share on other sites
VAG-hag 0 Posted May 13, 2014 Sorry Chris, don't have it. No worries man Quote Share this post Link to post Share on other sites
pauly2850 0 Posted May 19, 2014 Bonnet cable received, thanks.. Quote Share this post Link to post Share on other sites
Declan Sedrick Lehane 10 Posted May 22, 2014 Would the '2.5" Stainless Powerflow exhaust, oval tailpipe decat (still managed to pass emissions!) 125 Collection only.' fit a late VR6? Quote Share this post Link to post Share on other sites
The_Dude 0 Posted May 22, 2014 Would the '2.5" Stainless Powerflow exhaust, oval tailpipe decat (still managed to pass emissions!) 125 Collection only.' fit a late VR6? Yes, that's what it came off. Quote Share this post Link to post Share on other sites
Declan Sedrick Lehane 10 Posted May 22, 2014 Any chance of a few photos? What condition is it in? Quote Share this post Link to post Share on other sites
essex dan 0 Posted May 22, 2014 do you have the vent that goes between the heater matrix and windscreen plz? Quote Share this post Link to post Share on other sites
The_Dude 0 Posted May 22, 2014 Any chance of a few photos? What condition is it in? Its in good nick. A bit dirty, but no holes, dents, rust, etc. Quote Share this post Link to post Share on other sites
The_Dude 0 Posted May 22, 2014 do you have the vent that goes between the heater matrix and windscreen plz? Yes. Do you just need the middle one or all 3? Quote Share this post Link to post Share on other sites
essex dan 0 Posted May 22, 2014 just the middle bit plz, ive mislaidmy one :-/ is it a single piece or does it connect to another bit which in thrn connects to the actual matrix housing? i cant remember Quote Share this post Link to post Share on other sites
The_Dude 0 Posted May 22, 2014 just the middle bit plz, ive mislaidmy one :-/ is it a single piece or does it connect to another bit which in thrn connects to the actual matrix housing? i cant remember goes straight on afaik. Quote Share this post Link to post Share on other sites
essex dan 0 Posted May 22, 2014 not that bit, its the one that goes on the top for the windscreen demist function im sure its a different looking bit. ill try and find a picture Quote Share this post Link to post Share on other sites
essex dan 0 Posted May 22, 2014 found one similar from a mk2 golf. its the letterbox shaped thing at the top, number 122 (i think) on that pic Quote Share this post Link to post Share on other sites
The_Dude 0 Posted May 22, 2014 I don't remember seeing that in the pile o'crap that I've got. I'll double check over the weekend but I think you'll have to look elsewhere. Quote Share this post Link to post Share on other sites
essex dan 0 Posted May 22, 2014 ok cool thanks! Quote Share this post Link to post Share on other sites