Spolier issue when lowering

[awigman 0]

My second post of the day requesting help!

 

My spoiler seems to operate fine when it rises however when it lowers automatically it drops a little then stops. When you lower is manually its drops a little, stops then you hear a tick (presumably from a switch) then drops a little bit more, then ticks then a little bit more and so on and so on until its all the way down.

 

Any advise?

 

Thanks

[Jon_vr6 1]

Two choices by a brand new motor or bypass the green thermal fuse in the motor

[johnnyfication 0]

It could just require stripping and cleaning. Mine did the same, so I stripped it down and cleaned and re-greased the motor + complete mech.

 

It now works perfectly.

 

Word of warning it can be fiddly to put back together, but if you take your time it will go.

[Jon_vr6 1]

When it clicks though it means the thermo fuse is on its way out

[dragon green 4]

Give it a good clean,what is there to lose !

http://the-corrado.net/showthread.php?t=51125

[Roger Chatfield 0]

As above, I had the same problem with mine, removed it, stripped it down and gave it a good clean, now works fine.

 

I did notice a fair bit of copper dust in and around the motor commutator, this may have been causing shorts and hence tripping the thermal fuse.

 

Rog.