VR6 Alloy Sump, 6 Branch, Engine Mounts, ABS Pump/ECU,Clocks - SOLD

[iceviolet 0]

VR6 Alloy Sump, 6 Branch, Engine Mounts, ABS Pump/ECU,Clocks

 

Hello,

I have a few bits for sale that are just collecting dust in my garage now.

 

-Brand new alloy baffled sump from the later engines. Direct replacement for the steel pressed sumps. Included is a tube of sealant.

60 pounds posted

 

-Front and Rear VR6 engine mounts - bought from the group buy a while ago, never fitted.

45 pounds posted.

 

-6 Branch manifold - has seen about 3000 miles, was not an expensive one circa 200 iirc. used condition.

50 pounds posted.

 

-VR6 ABS Pump and ECU - Known working (replaced but fault was elsewhere). Slight damage to underside of wiring connection on pump.

25 pounds posted.

 

-VR6 Clocks - Spares/Repairs - iirc the coolant light bulb would not stop flashing so I changed them out. Mileage is about 130000 I think. Small crack in perspex next to reset button.

15 pounds posted.

 

 

Thanks,

 

Sam

 

 

List Date: 9/10/2014

 

For more info, click here to view the original listing: VR6 Alloy Sump, 6 Branch, Engine Mounts, ABS Pump/ECU,Clocks

--------------------------------------

SOLD

 

--------------------------------------

 

Mobile friendly version: VR6 Alloy Sump, 6 Branch, Engine Mounts, ABS Pump/ECU,Clocks

 

Go Mobile: Download the free Panjo iOS app now!

Edited September 13, 2014 by iceviolet

[fla 9]

interested in the 6-branch and mounts. Does this have the gearbox or rear mount? If the rear i'll deffo take those, can I get back to you later on teh 6-branch (checking funds!)?

[winchbietch 0]

Interested in the exhaust manifold if the sale falls through..

[Jim Bowen 1]

If they are from the group buy then i am sure its the front and rear engine mounts and not the gearbox one.

[iceviolet 0]

fla, I am pretty sure it is the front and rear mounts. The gearbox mount is much smaller. Let me know about the manifold asap.

 

Winchbietch, if fla does not want the manifold then you have first dibs.

 

Thanks

[fla 9]

thanks iceviolet. I'll take the mounts then please, and winchbietch the manifold's yours.

[iceviolet 0]

Ok no problem I will PM you details.

[winchbietch 0]

Thanks Fla.

Iceviolet can you pm me your details and I will send funds.

 

Paul

[bigchagg 0]

Hi interested in the sump. Can somone tell other than the meterial, whats the difference between the one I have at the moment all I can see that its black.

 

Does this allow hard cornering without the oil running to one side?

 

Also is this more shallower?

Edited September 10, 2014 by bigchagg

[iceviolet 0]

Thats the Manifold, Mounts and Sump gone now.

 

Sorry bigchagg just too late, I had a PM yesterday from a new member who has said they will take it.

 

Cheers,

 

Sam

[bigchagg 0]

Thats the Manifold, Mounts and Sump gone now.

 

Sorry bigchagg just too late, I had a PM yesterday from a new member who has said they will take it.

 

Cheers,

 

Sam

 

Fair doos

[iceviolet 0]

Just the ABS pump and ECU, and the clocks available now. Open to offers on both.

 

Thanks,

 

Sam

[sankysvr6 0]

Will you take £10 for the clocks posted.

[iceviolet 0]

Will you take £10 for the clocks posted.

 

Yes I can do £10.

[sankysvr6 0]

PM, your payment details bud

[winchbietch 0]

Manifold received

Thanks again

[pbradley98 0]

Hi Sam,

 

Would you do the VR6 ABS Pump and ECU for £20 posted? I'm also trying to trouble shoot so need to start swapping out some parts!

 

Thanks

 

Phil