eugopnosaj 0 Posted November 3, 2014 Various odds and sods Ok guys, so need to have a bit of a clear out of some of my corrado bits, there's some 16v parts and also some VR parts but mostly they're interchangable. I'm looking to get rid of everything so if the price is a bit much then please make an offer. Would rather accept less and see parts help someone than them go to waste. Prices don't include postage, as some of the items are heavy, other smaller items won't cost much obviously. Prices are taken from looking through other threads. Other photos can be provided on request. Thanks for looking: Interior: Later heater box with fan and heating controls (I do have the surround for the controls). Fan worked on all settings, there is a cable clip missing from the controls. Removed due to climatronic upgrade. ?40 Window ECU. 191 959 875. Removed working from late car. ?8 Central locking pump. 357 92 257. Removed untested from donor car. ?8 Late sunroof motor. Removed working from donor car. ?15 Handbrake, removed due to MK4 upgrade ?10 Early sunroof motor. Removed due to late interior swap. ?10 ABS ECU. 1H0 907 379 D. Removed working from late donor car. ?12 Various parts including door grabs, oh Sh*t handle, late grey dash speaker covers, early door release pull inc surround, grey foot well central tunnel heater outlets. ?20 lot (make offers) Gear knob ?5 Central locking solenoids. Removed working from donor car. ?12 (?5 each) Various switches including: Early window switch, (have drivers switch somewhere), ?8 each (?15 as pair) Early ABS light, ?8 2no. Sharon/Galaxy/Alhambra heated seat switches (dials rotate different directions on each 7MO 963 563C - down. 7MO 963 563B - up, drivers side doesn't latch, both working) green illumination. Useful for parts swap or temporary fit. ?15 (563C) / ?10 (563B) Early fog light switch, removed working. ?8 Late rear demister switch - untested ?5 Early MFA wiper stalk, removed working due to late interior swap. ?15 Glove box handle/lock - no key ?5 Various heating control dials/illumination plastics. ?5 Early dials, removed from dash cluster as LCDs were damaged, swapped for late conversion ?7 Engine: KR cams ?30 offers welcome 9A cams ?15 as less desirable 9A HT lead rail, removed working. (inc lead from coil to dizzy) 032 905 487 ?18 Starter motor, removed working from 80k (ish) donor engine - only used the head. Grubby 02A 911 023 F ?30 9A '92 distributor, removed working, leaking cap. 027 905 205 P ?20 Expansion bottle, removed from donor car 1H0 121 407 ?12 16no. Cam followers, used. ?10 Suspension/front and rear axle: Lowered front shocks, unknown, came on my valver before upgrading to Koni's. Part numbers visible are VW501V 28-02. Made in EU. High performance. Google search comes up with Autotechnics? Might be useful ...most likely destined for the bin! Originally blue...make me an offer Standard rear shocks, came as a set with the fronts, only needed the fronts. Top spring mount circlip missing as shown. No springs or top mounts. Painted black by PO..?10 9A front disk calipers, removed from donor car, sat in storage, need a refurb, no leaks at time of removal. ?40 MK4 rear caliper carriers (bought with calipers for MK4 rear conversion, carriers not used, most likely bin) Make me an offer Good condition, (was fairly new when i bought the car albeit very grubby and obviously used, believe I have the original purchase invoice by PO) single rear caliper, swapped over for MK4 conversion ?35 Handbrake cables ?15 Exterior: Drivers side mirror, motor works, heated mirror does not however untested. In classic green, paintwork isn't too bad ?20 Tailgate rear lights, reasonable condition, one has crack as shown on image. ?12 Tailgate lock/push - no key. ?7 Offers on all items welcome! List Date: 11/3/2014 For more info, click here to view the original listing: Various odds and sods -------------------------------------- On Sale For: ?507.00 -------------------------------------- Mobile friendly version: Various odds and sods Go Mobile: Download the free Panjo iOS app now! Quote Share this post Link to post Share on other sites
stuarttaylor37 13 Posted November 4, 2014 How much for the heater controls posted please? Quote Share this post Link to post Share on other sites
seanl82 23 Posted November 4, 2014 Hi mate, interested in heater box with controls. Would you be able to post, and if so how much? Thanks, Sean. Quote Share this post Link to post Share on other sites
eugopnosaj 0 Posted November 4, 2014 Will look into postage prices later today. Quote Share this post Link to post Share on other sites
jimcarp 10 Posted November 4, 2014 Hi mate, interested in abs ecu. Don't have part number from mine and may not know but is this suitable for a vr? Would require postage too if you could advise price. Thanks, Jim Quote Share this post Link to post Share on other sites
eugopnosaj 0 Posted November 4, 2014 Heater box and controls are approx £15 delivered so call it £55, Stuart asked first so he gets first refusal. Jim, the ABS ECU part number is different from cars with EDL, which I believe was standard on the VR but I'm not sure, the part number for this is 535907379F, if you remove the screws to the plastic cover in the passengers footwell on the A pillar you will find the ECU, double check the part number. If its good £17 inc p + p as its quite weighty and would want to protect it. Quote Share this post Link to post Share on other sites
eugopnosaj 0 Posted November 4, 2014 Heater box and controls are approx £15 delivered so call it £55, Stuart asked first so he gets first refusal. Jim, the ABS ECU part number is different from cars with EDL, which I believe was standard on the VR but I'm not sure, the part number for this is 535907379F, if you remove the screws to the plastic cover in the passengers footwell on the A pillar you will find the ECU, double check the part number. If its good £17 inc p + p as its quite weighty and would want to protect it. Quote Share this post Link to post Share on other sites
seanl82 23 Posted November 4, 2014 OK I'll take it if Stuart doesn't. Thanks. Quote Share this post Link to post Share on other sites
GusPW 0 Posted November 5, 2014 Hi, I'll take the handbrake if it includes the leather trimmed handle with intact clips? Quote Share this post Link to post Share on other sites
eugopnosaj 0 Posted November 5, 2014 Clips are intact but its not leather unfortunately. Quote Share this post Link to post Share on other sites
Hassan. 10 Posted November 5, 2014 Hi mate, Do you have the wiring loom/harness that goes to the 3 pin connector on the distributor? Thanks Quote Share this post Link to post Share on other sites
eugopnosaj 0 Posted November 5, 2014 I've got some loom, not sure what is left but I'll have a look for you. Quote Share this post Link to post Share on other sites
eugopnosaj 0 Posted November 6, 2014 (edited) Heating controls sold, box and motor SOLD It won't let me edit the first post as it says its too long! Edited November 6, 2014 by eugopnosaj Quote Share this post Link to post Share on other sites
GusPW 0 Posted November 6, 2014 Clips are intact but its not leather unfortunately. Ah ok, never mind, I'll leave it then Quote Share this post Link to post Share on other sites
eugopnosaj 0 Posted November 9, 2014 Hi mate, Do you have the wiring loom/harness that goes to the 3 pin connector on the distributor? Thanks Sorry mate I haven't got any engine side loom. Quote Share this post Link to post Share on other sites
eugopnosaj 0 Posted November 18, 2014 Bump, heater controls back up for sale, turns out the missing clip was caused by damage to the controls it seems £35 including postage. Quote Share this post Link to post Share on other sites
seanl82 23 Posted November 18, 2014 I'll have the gear knob and boot lock please. Can you pm price with postage and I'll get it across this evening. Thanks! Quote Share this post Link to post Share on other sites
eugopnosaj 0 Posted November 18, 2014 No worries will sort it when I get home from work mate. Quote Share this post Link to post Share on other sites
Peacedub 10 Posted November 18, 2014 Hi, Interested in the late spec heater controls and the ignition leads (9a). What's the issue with the heater controls? Are they repairable? Mine doesn't work on No.4 so will keep as spare. How much for both posted? Regards Steve Quote Share this post Link to post Share on other sites
eugopnosaj 0 Posted November 20, 2014 Hi, Interested in the late spec heater controls and the ignition leads (9a). What's the issue with the heater controls? Are they repairable? Mine doesn't work on No.4 so will keep as spare. How much for both posted? Regards Steve gear knob and boot lock SOLD Peacedub, they can be repairable, part of the plastic which holds the clip in place for one of the directional bowden cables has come off, don't ask where it is its looong gone. It worked on all settings i only took it out to replace for climatronic. I can do them both for £52 posted, i have reduced the cost of the heater controls due to the damage, let me know. Thanks Quote Share this post Link to post Share on other sites