The big day of disappointment

[Mk3highline 10]

Well I hope I have more than 140ft lbs lol on stealthy rollers

[Jim Bowen 1]

I hope you have decent running shoes on as that's quite a feat. :lol:

 

Are you testing the car as well while you're there?

[Mk3highline 10]

Yeah it's been done got a problem with the cam position sensor which needs sorting with some det post up a graph shortly got one run with the flaps on and off overlayed

[Mk3highline 10]

Well obviously with the 12v obd2 ECU standard map with the flaps closed was 197bhp @6100 rpm

With the flaps open it was 229bhp @ 6353rpm

[Sean_Jaymo 0]

229 is good going!

[Mk3highline 10]

I couldn't believe it, still don't lol

The graphs are up on the 24v thread

With the flaps open I got torque all way to rev limiter

So I guess once the cam sensor problem is solved and mapped it should be ok

[VAG-hag 0]

Open flaps = :)

[Mk3highline 10]

Got a new cam sensor

Wired in new plug for sensor, problem I have is laptop has died and not got another laptop to use the vag com with

Got a cheepy scanner but it has never shown the cam sensor fault

Reset ECU so will see if there is anything different now on my way to work later

[Mk3highline 10]

Things only go from bad to worse

It's a lot trickier to drive on slight icy roads

Ferodo pads and wave diff are desperately needed too

There was me over excited yesterday and now I can't believe the difference with a working cam position sensor

It's insane