craigbeal 0 Posted June 28, 2004 Ive got a little spark plug remover and still wont go down as the gasket seems to be in the way? Has anyone else had this problem and what can i do? Quote Share this post Link to post Share on other sites
craigbeal 0 Posted June 28, 2004 my mate said that i might have to trim the gasket inside but dont know what to cut it with or if i should at all? Quote Share this post Link to post Share on other sites
dazzyvr6 0 Posted June 28, 2004 just trimming the gasket shouldnt cause any problems,someone must of put the gasket on out of alignment Quote Share this post Link to post Share on other sites
craigbeal 0 Posted June 28, 2004 whats best to cut this with as its metal and deep down? the gasket is popping into the spark tube all the way round where its compressed under pressure when they have put the top back on... ? Quote Share this post Link to post Share on other sites
Kevin Bacon 5 Posted June 28, 2004 Just get a new gasket from VW and lift the rocker cover, doesn't take long once the inlet manifold off. Some has squished the gasket out of shape, by over torquing the rocker cover most likely. Quote Share this post Link to post Share on other sites
