VR6Pete 0 Posted April 19, 2016 Hi Guys, i'm after a headlight adjuster for late corrado. My drivers has snapped so need to replace. Thanks. Quote Share this post Link to post Share on other sites
g0ldf1ng3r 13 Posted April 19, 2016 Hi Guys, i'm after a headlight adjuster for late corrado. My drivers has snapped so need to replace. Thanks. can of worms here Pete the adjusters are notoriously brittle & from what I have read can be a real pain to remove & refit I have a pair of early headlights from which I need to make a working set with the ones currently in the valver - for the same reason of broken adjusters I thought I would try the donor light route first but am also aware that you can buy a metal adjuster from here, but they are expensive, http://www.tdnparts.com/corrado-euro-light-adjuster-kit/ Quote Share this post Link to post Share on other sites
VR6Pete 0 Posted June 23, 2016 Still after one of these, appreciate they are brittle but need to get something to seal up my head light and refit before MOT. I did look at the metal adjusters but way too ££££ 3D printing may be an option but not sure how to go about that. So, does anyone have a broken headlight where the adjuster is still in tact? Quote Share this post Link to post Share on other sites
seanl82 23 Posted June 23, 2016 There was a brand new old stock set on ebay earlier this week. Went for a bit daft money via auction. Quote Share this post Link to post Share on other sites
seanl82 23 Posted June 23, 2016 Tell a lie, they're still on with 3 days left. Quote Share this post Link to post Share on other sites
VR6Pete 0 Posted June 23, 2016 Link dude? Sent from my iPhone using Tapatalk Quote Share this post Link to post Share on other sites
fendervg 30 Posted June 24, 2016 Did ARZ-Tuning in Germany not have them new for a while? I might have a few knocking around - will keep an eye out. Quote Share this post Link to post Share on other sites
seanl82 23 Posted June 24, 2016 http://www.ebay.co.uk/itm/301984419081 Quote Share this post Link to post Share on other sites
Jim Bowen 1 Posted June 24, 2016 I have a set of inpro headlights and meant to find out if the adjusters from them can be adapted to suit, they were the same except the end that clips onto the reflector. never got as far as finding out if the end can be swapped over, or if you can buy the adjusters from in pro Quote Share this post Link to post Share on other sites
Jim Bowen 1 Posted June 24, 2016 Just googling. think its just this end bit that differs http://www.europeanperformanceproducts.com/shop/product_info.php/info/p2203_Adapter-for-Manual-Headlight-Adjusters---VW-Corrado.html/MSsid/ehs202td4tqh8b177g7er95ug4 Quote Share this post Link to post Share on other sites
VR6Pete 0 Posted June 24, 2016 Its the bit that secures into the headlight case that has snapped on mine. Will look at that one on ebay Quote Share this post Link to post Share on other sites
seanl82 23 Posted June 27, 2016 Anyone on here buy these? Quote Share this post Link to post Share on other sites
Jim Bowen 1 Posted June 27, 2016 Made mine from quicksteel Quote Share this post Link to post Share on other sites
seanl82 23 Posted June 27, 2016 Bit of a mental price tbf. Quote Share this post Link to post Share on other sites
