Will.I.Dub 11 Posted August 21, 2016 (edited) Damn power window module is making me feel foolish Sent from my D5803 using Tapatalk Edited August 21, 2016 by Will.I.Dub Quote Share this post Link to post Share on other sites
Jon_vr6 1 Posted August 21, 2016 Its a right pain to get out i used some grips to get it out Sent from my SM-G900F using Tapatalk Quote Share this post Link to post Share on other sites
fendervg 30 Posted August 22, 2016 Spray some electrical contact cleaner or WD-40 in there and then start moving it side to side very slowly while pulling out - use a pair of flat pliers or a pipe wrench and a protective cloth, preferably on a bench vice. There might be a locking tab as well. Quote Share this post Link to post Share on other sites
Dox 22 Posted August 22, 2016 I always find pushing in first holding the plugs securing clip before pulling on the plug (not the wiring) all in a single motion works best for me. Quote Share this post Link to post Share on other sites
Will.I.Dub 11 Posted August 22, 2016 Problem is there is no locking tab that's obvious to me Sent from my D5803 using Tapatalk Quote Share this post Link to post Share on other sites
Dox 22 Posted August 22, 2016 It does look like theres no clip on that plug Sent from my iPhone using Tapatalk Quote Share this post Link to post Share on other sites
Will.I.Dub 11 Posted August 25, 2016 Thanks all. Brute force and ignorance solved this one. There is no locking tab to be depressed on this plug but there are two little hooks that keep the plug tight. Wiggling while pulling worked for me! Quote Share this post Link to post Share on other sites
