carrots 1 Posted January 14, 2017 I went in the car last night,turned the car off but the heater blower kept going with the ignition off until I turned the lights off.any ideas Quote Share this post Link to post Share on other sites
seanl82 23 Posted January 14, 2017 You've probably got a short or cross connection somewhere. I had similar where I could the ignition off, but the car would continue running if the lights were on. My entire wiring throughout was a fire waiting to happen so I pretty much replaced every loom on the car. I'm not suggesting yours is the same, but I'd disconnect the battery and trace the wiring from the blower switch all the way to the fuse box, and do the same with the ignition switch. You may find it, and you may find other wiring bodges along the way. Repair what you can by soldering and heatshrink, or get an auto sparky to do the same as it'll be an accident waiting to happen mate. Quote Share this post Link to post Share on other sites
carrots 1 Posted January 14, 2017 Nightmare of a job then Quote Share this post Link to post Share on other sites
seanl82 23 Posted January 14, 2017 It's time consuming but not difficult. Removing trim etc helps for access, and you'll be able to trace it easier if you can see where it's going, so in fact it becomes quite a simple job until/if you find problems. Quote Share this post Link to post Share on other sites
carrots 1 Posted January 14, 2017 I've got a fire extinguisher on the ready.once the car warmed up it was ok Quote Share this post Link to post Share on other sites
