Neil mcgonagle 10 Posted April 18, 2017 (edited) Can anyone help I'm having bottom end rebuilt on my g60 had crank sorted the guy that is building the engine says he is struggling finding oversized pistons can anyone give me some info on maybe where to get hold of some or if there is any out of another engine that might fit this is after buying a supposedly recone engine off eBay about 5/6 years ago not fitting it for years then putting it in the crank was cracked and the bores were wore out any help would Be great thanks 🤞👍 Edited April 18, 2017 by Neil mcgonagle Quote Share this post Link to post Share on other sites
GazzaG6001 10 Posted April 19, 2017 Hi, i ended up getting mine from a firm in Germany called ARZ Tuning. Cost me about £480 Delivered in 2-3 days. Came with all rings etc. Happy days :-) Sent from my Nexus 5X using Tapatalk Quote Share this post Link to post Share on other sites
Neil mcgonagle 10 Posted April 19, 2017 Thanks for that pal I will av a look cheers Quote Share this post Link to post Share on other sites
GazzaG6001 10 Posted April 19, 2017 No worries, where are you located? I'm about to start my engine rebuild in next few weeks, just been fitting my restored loom :-) Sent from my Nexus 5X using Tapatalk Quote Share this post Link to post Share on other sites
ger040 2 Posted April 20, 2017 there is an add on ebay selling genuine oversize piston rings (0.5) if the block is not that bad Quote Share this post Link to post Share on other sites
Neil mcgonagle 10 Posted April 20, 2017 Thanks but I think it needs to go about 1mm these cars were sent to try us 😂👍 Quote Share this post Link to post Share on other sites
Neil mcgonagle 10 Posted April 20, 2017 Lancashire hope to get car out this year never had the money but never wanted to sell it Quote Share this post Link to post Share on other sites
GazzaG6001 10 Posted April 20, 2017 Why are all Corrado owners based up north lol well hopefully have mine back together this year so may bump into at a show next year. Good luck with your build :-) Sent from my Nexus 5X using Tapatalk Quote Share this post Link to post Share on other sites
Geeba 0 Posted April 20, 2017 Can't you just go for the 1900 overbore pistons? Karl Schmidt type of thing? More torque to boot... Quote Share this post Link to post Share on other sites
Neil mcgonagle 10 Posted April 20, 2017 I will look in to it not sure thanks Quote Share this post Link to post Share on other sites
odub 0 Posted April 21, 2017 Is this what you're after? http://www.steelconrods.co.uk/product_info.php?cPath=22_47_108&products_id=190 Quote Share this post Link to post Share on other sites
