tomi 10 Posted October 9, 2017 (edited) For sale is Fully rebuild Vr6 12V head? It was done by proffesional shop that works only on cylinder heads, - head was cleaned, - skimmed, - all brand new valves installed (exhaust and intake) - all new valve gudes instaled - all new valve stems - presure tested for leaks and cracks Basically it is almost like new cylinder head, ready to bolt on to Your VR6, never installed after all job was done. There is plastick bag with old valves valve steams etc, to proof that they are replaced. I sold couple of them in this thrad http://the-corrado.net/showthread.php?97682-VR6-12V-Head-for-sale-FULLY-REBUILD-head-gasket-bolts I also had my VR6 engine fully rebuilt month ago , I also used cylinder head fully rebuilt by the same company that rebuilt head I offer for sale, and I can say that engine is working fantastic so far, with 268 cams installed. For some reason I have a problem with pictures uploading so I can send detailed pictures directly to Your email. Edited January 9, 2018 by tomi Quote Share this post Link to post Share on other sites
tomi 10 Posted October 9, 2017 (edited) [ATTACH=CONFIG]89603[/ATTACH] [ATTACH=CONFIG]89606[/ATTACH] and also picture the ther one installed to my rebuilt engine :) [ATTACH=CONFIG]89609[/ATTACH] Edited October 10, 2017 by tomi Quote Share this post Link to post Share on other sites
Rocket Ron 1 Posted October 12, 2017 Tomi Seriously thinking of purchasing one of these. Will probably be in touch once I have assessed funding next couple of weeks as I'm off working overseas next week. What/how do you accept payment. Also once I remove old and fitted new what are suggestions for the disposal of the old head. Cheers Ron Quote Share this post Link to post Share on other sites
seanl82 23 Posted October 12, 2017 Sell it on Ron. Someone will give you a few quid for it I'd imagine. Ideal for refurbishing! Quote Share this post Link to post Share on other sites
Geeba 0 Posted October 12, 2017 Big valve and a port and polish! Quote Share this post Link to post Share on other sites
Rocket Ron 1 Posted October 12, 2017 Any idea how much it's worth ? Quote Share this post Link to post Share on other sites
GlosterOx 0 Posted October 13, 2017 Would like to think it's got to be worth £50/75 of anybodies money Ron? Quote Share this post Link to post Share on other sites
Jim 1 Posted October 13, 2017 Get it bought Ron - you've been talking about a head rebuild on yours for longer than I can remember :) You could of course also get your head refurbished once you've acquired and fitted this, and sell it on for similar money. Quote Share this post Link to post Share on other sites
Rocket Ron 1 Posted December 2, 2017 Hi Finally got around to it head taken off but it has been found cylinder bores worn and various other issues looks like rebuild or refurb engine. Whats the best way forward Quote Share this post Link to post Share on other sites
VEEDUBBED 0 Posted December 2, 2017 Easy mate! Just buy my 19.000km block, crank, rods and pistons!! job done. Let me know if you want any photos. Cheers-Andrew. Quote Share this post Link to post Share on other sites
tomi 10 Posted December 2, 2017 Hi Finally got around to it head taken off but it has been found cylinder bores worn and various other issues looks like rebuild or refurb engine. Whats the best way forward I can sort You out with cylinder head if You want, I sold the one is listed in this thread, but I can get another one done if You will want one, Tomi Quote Share this post Link to post Share on other sites
Rocket Ron 1 Posted December 3, 2017 (edited) Post photos and where are you. Just noticed Italy. And how much ? Edited December 3, 2017 by Rocket Ron Quote Share this post Link to post Share on other sites
VEEDUBBED 0 Posted December 3, 2017 Yep, Rome it is.. Don't let that put you off mate, i've Got a courior who does very good prices. I've sent parts all over the world.. Send me your email and I'll send you a load of photos. Cheers-Andrew Quote Share this post Link to post Share on other sites
Rocket Ron 1 Posted December 11, 2017 (edited) Thanks for info Of the cuff question do VW still have any complete VR6 engines hiding away somewhere. Also has anyone ever used VEGE UK for engines rebuild or exchange? Thanks Edited December 11, 2017 by Rocket Ron Quote Share this post Link to post Share on other sites
Dox 22 Posted December 11, 2017 Thanks for info Of the cuff question do VW still have any complete VR6 engines hiding away somewhere. Also has anyone ever used VEGE UK for engines rebuild or exchange? Thanks I'm sure Somersetdub had a VEGE engine fitted a few years ago that expired earlier this year after being turbod? Quote Share this post Link to post Share on other sites
Dox 22 Posted December 11, 2017 Thought so http://the-corrado.net/showthread.php?50041-Somersetdub-s-Aqua-Blue-VR6/page3 Nice guy (I bought his old engine), I'm sure he wouldn't mind f you sent him a PM re his experience with the engine? Quote Share this post Link to post Share on other sites
VEEDUBBED 0 Posted December 12, 2017 Sorry for not getting back to you Ron. I have done my arm/shoulder an injury (shoulder tendons) so i can barely lift a mug of dam tea, no way i can move the engine block mate. Quote Share this post Link to post Share on other sites
GlosterOx 0 Posted December 12, 2017 I had a VEGE Engine in my Red VR6 Ron, plus have one of their rebuilt heads now - Had no problems with either. Ian. Quote Share this post Link to post Share on other sites