marks2 0 Posted January 1, 2018 (edited) Having taken the decision to sell my G60 i'm listing all my spares. All prices + P&P. Bigger items are collection only (i'm located close to Maidenhead). More than happy to post photos of parts on request. I have a-lot more parts which i'll be listing shortly. G60 Tuning Kit.65mm Alloy pulley, Gwerk Chip + Shorter Drive Belt. £45.00 Fan Controller Module 1HO919506B £20.00 CO Sensor 037 906 040B £40.00 Relay 99 - Wash Wipe 357 955 531 £10.00 G60 Green Injectors £20.00 Power Steering Pulley, VGC 27145255 £8.00 Spolier Control Unit, tested, Working 535 919 845A £20.00 Beru Ignition Leads - set £8.00 G60 Supercharger Springs (fit behind the apex seals in the scrolls) £10.00 Front Engine Mount, VGC £50.00 ABS Light (early dash) 535 919 235B £15.00 Fog Light Switch 535 941 535 £8.00 Heated Rear Window Switch 535 959 62 £8.00 Electric Window Switch, early Interior, 3 available @ £8 each 357 959 855A £8.00 Headlight Switch 535 941 531B £20.00 Switch Blanking plate - no logo £10.00 Switch Blanking plate - Unleaded logo £10.00 External Temp Sensor (Fits to brake duct) £8.00 Headlight Connectors (Used) 357941165 £12.00 Sunroof switch 357 959 855B £10.00 Brake Light Switch 191 945 515 £5.00 Handbrake Switch 1H0947561 £3.00 Spolier Switch 535 959 855 £5.00 Front Seat Covers, early Black / Green, VGC £100.00 Porsche Front Brake Kit. 996 / Boxster S Calipers (Red), 305mm discs, HEL hoses + Adaptors. More info to follow. £550.00 PG Engine Block £50.00 PG Head £50.00 02A Gearbox £30.00 Rear Bumper, Pearl Green £40.00 Rear Bumper bracket £35.00 Late spec Offside Wing, Pearl Green (some rust) £45.00 Late spec Offside Wing, Pearl Green (some rust) £45.00 Headlight Glass (Early) VGC £40.00 Front Hubs, stripped ready for new bearings £40.00 G60 Driveshafts £50.00 Cam Cover. Stripped of paint ready to polish / paint. Includes oil filler cap + breather. £30.00 Space Saver wheel. 4x100. £10.00 Steering UJ £20.00 Heat Shield 358 614 321 £10.00 Slam Panel, Pearl Green £35.00 Fuel Filler Cover, Pearl Green £10.00 Inlet Manifold £20.00 Supercharger Brackets £30.00 68mm Pulley, steel. £10.00 Exhaust Manifold £10.00 Exhaust Downpipes £10.00 Tow Pack Rad £15.00 Wheel arch inner wings £20.00 G60 Badges £30 Fuse Box + Relays £20 FK Konigsport coilover bits £50 Electric Window Mech #1 £35 Electric Window Mech #2 £35 Nearside Wing Mirror, Pearl Green £35 Offside Wing Mirror, Pearl Green £35 SOLD VibraTechnics Rear Engine Mount VGC £55.00 Headlight casing Near Side £15 Headlight casing Off Side £15 Edited January 24, 2018 by marks2 Quote Share this post Link to post Share on other sites
VEEDUBBED 0 Posted January 1, 2018 (edited) Both headlamp casings pleeze, as Long as all tabs are intact and are both in good nick, I'll take the SWG scuttle panel as well, dunno if it'll be ok for a LHD corrado though.. THE G60 CRANKSHAFT..WILL IT EVER GET POSTED THOUGH??? Happy new year Edited January 1, 2018 by VEEDUBBED Quote Share this post Link to post Share on other sites
BarberG60 10 Posted January 1, 2018 Bahn Brenner RSR outlet, G60 hard pipes and intercooler too please. Will send a message Quote Share this post Link to post Share on other sites
dickie 0 Posted January 1, 2018 Hi, what condition is the swg panel? If good I'll take it please. Quote Share this post Link to post Share on other sites
Adammcc34 10 Posted January 2, 2018 I'm interested in the mk4 rear brakes. Can you post these? Quote Share this post Link to post Share on other sites
marks2 0 Posted January 2, 2018 (edited) Sorry all the weather has been awful today so i've not been out to the garage to take photos. Adam - Yes I can post the rear brakes. Dickie - SWG panel has one light wear mark where the bonnet has rubbed on it, other than that all good. Edited January 2, 2018 by marks2 Quote Share this post Link to post Share on other sites
Adammcc34 10 Posted January 2, 2018 Just had a look I'm working in Windsor over the next week then in Northolt in 2 weeks I maybe able to collect. Quote Share this post Link to post Share on other sites
VEEDUBBED 0 Posted January 2, 2018 Crankshaft and the two headlamp casings?? Quote Share this post Link to post Share on other sites
marks2 0 Posted January 2, 2018 Crankshaft and the two headlamp casings?? - Haven't forgotten! Will post some pics tomorrow morning. Quote Share this post Link to post Share on other sites
marks2 0 Posted January 2, 2018 Just had a look I'm working in Windsor over the next week then in Northolt in 2 weeks I maybe able to collect. - I'm approx 16 miles from Windsor. Pickup no problem. Quote Share this post Link to post Share on other sites
craigib76 0 Posted January 2, 2018 Any pics of the isv Quote Share this post Link to post Share on other sites
marks2 0 Posted January 3, 2018 (edited) Isv Edited January 3, 2018 by marks2 Quote Share this post Link to post Share on other sites
marks2 0 Posted January 3, 2018 (edited) Crank and Head Light Casing Andy - I started to pack the crank (hence the zip ties holding it into a plastic container). Edited January 3, 2018 by marks2 Quote Share this post Link to post Share on other sites
marks2 0 Posted January 3, 2018 Other pics to follow shortly..... Quote Share this post Link to post Share on other sites
VEEDUBBED 0 Posted January 3, 2018 (edited) Right mark, sort it out postage wise mate. One thing regarding the headlamp casings before posting them, do me a favour, ( VERY IMPORTANT!!) could you protect the all important headlamp adjusters by using 2 old aerosol can caps? just tape them in place securley over the exposed thumb adjuster bit so that both plastic adjusters won't crumble or get bumped in transit as i've had this happen before.. As long as they are covered they should hopefully be fine. All bits look ok, not bothered about the hole or snapped bit. Edited January 3, 2018 by VEEDUBBED Quote Share this post Link to post Share on other sites
marks2 0 Posted January 4, 2018 Right mark, sort it out postage wise mate. One thing regarding the headlamp casings before posting them, do me a favour, ( VERY IMPORTANT!!) could you protect the all important headlamp adjusters by using 2 old aerosol can caps? just tape them in place securley over the exposed thumb adjuster bit so that both plastic adjusters won't crumble or get bumped in transit as i've had this happen before.. As long as they are covered they should hopefully be fine. All bits look ok, not bothered about the hole or snapped bit. Andy - I'll package them up at the weekend and get a quote. It's going to be relatively expensive given the weight. Do you have any courier preference? BTW - I am concerned that the crank will destroy the casings during transit if dropped. It's going to be difficult to package with one for sure. Quote Share this post Link to post Share on other sites
marks2 0 Posted January 4, 2018 Pics of the Intercooler and hard pipes. SWG scuttle to follow (When i've found the stock items I need to re-fit to my car). Quote Share this post Link to post Share on other sites
VEEDUBBED 0 Posted January 5, 2018 Very wise idea mark.. Send them in two different packages mate. Sort it all out and let me know. Regarding couriors, I often use Packlink to post bits all over the world, excellent prices and mostly reliable. Cheers. Quote Share this post Link to post Share on other sites
SR_Neale 10 Posted January 6, 2018 Do you have any pics of the oil cooler if still available? Quote Share this post Link to post Share on other sites
marks2 0 Posted January 9, 2018 Mocal Oil Cooler Quote Share this post Link to post Share on other sites
SteveM 10 Posted January 9, 2018 What spec is the vibra technics rear mount? (Road, race etc) Quote Share this post Link to post Share on other sites
marks2 0 Posted January 9, 2018 I believe it's the fast road mount not competition. Not sure how to tell the 2 apart though to be sure. Quote Share this post Link to post Share on other sites
marks2 0 Posted January 10, 2018 Some pics of the Vibra Technics Mount Quote Share this post Link to post Share on other sites
SR_Neale 10 Posted January 10, 2018 I will buy the oil cooler. Will pm to make arrangements. There are a couple of other parts I am after but will sort out in pm. Quote Share this post Link to post Share on other sites
