Voot /Tailgate rubber seal surround.

[Keyo 47]

Hi Kip,

 

Im after one x 1 fuse clip and one plastic philips screw clip that fits in the rear tail gate trim the one that you remove by turning 180 degrees.

 

Have x3 original new blue hose line clips throttle body x2 and x1 coolant reservoir

x4 aftermarket plugs for lower a plillar trims (fit)

x4 aftermarket plugs for the opposite larger plug holes (not tried these yet)

A pillar trim clips aftermarket.

Origianl body washers new.

 

Pm if your interested in a swop or a price for purchase.

 

Cheers. [ATTACH=CONFIG]96536[/ATTACH]

Edited March 13, 2019 by Keyo

[fla 9]

Trust me it hurt me paying it ha. Amos in Derbyshire said he had couple but he never answers his phone and thought sod him just pay up the German his never going to be bothered to post it. :scratch: It is an essential part to be fair the boot lid is awfull opening it without it and just going to put uneccesary pressure on surrounding fittings.

 

Might be worth looking at some boot opening springs. The clip over the damper and hook into the roof somewhere.

[KIPVW 0]

Let me see if i can find any.

 

Hi Kip,

 

Im after one x 1 fuse clip and one plastic philips screw clip that fits in the rear tail gate trim the one that you remove by turning 180 degrees.

 

Have x3 original new blue hose line clips throttle body x2 and x1 coolant reservoir

x4 aftermarket plugs for lower a plillar trims (fit)

x4 aftermarket plugs for the opposite larger plug holes (not tried these yet)

A pillar trim clips aftermarket.

Origianl body washers new.

 

Pm if your interested in a swop or a price for purchase.

 

Cheers. [ATTACH=CONFIG]96536[/ATTACH]

[Keyo 47]

Let me see if i can find any.

 

Thanks Kip.