Pjmur 10 Posted January 2, 2021 Hi. Can anyone advice please or have some knowledge on what brake system for front would suit to run with BBS Rs 17' with a ET 26 - I have the wheels but won't fit unless use 20mm spaces to clear existing calipers and then they extend beyond wheel arch - no a pretty site . Rear are perfect. I believe the existing brakes are original set up . Any advise greatly appreciated 👍 Pj Quote Share this post Link to post Share on other sites
Keyo 47 Posted January 2, 2021 You dont want to put smaller callipers on full stop imo - if they are genuine RS then I understand your dilemma- if they are reps get rid- if they are genuine sell them and make up the money and get correct fitment. I also imagine you could change the barrels to change the offsets perhaps but not to clued up on splits. Quote Share this post Link to post Share on other sites
Pjmur 10 Posted January 2, 2021 They are genuine alright . What's the correct Et do you know please bud ?. Kills me to sell them Tka for reply Quote Share this post Link to post Share on other sites
Keyo 47 Posted January 2, 2021 (edited) 10 minutes ago, Pjmur said: They are genuine alright . What's the correct Et do you know please bud ?. Kills me to sell them Tka for reply Beautiful alloys feel your pain = These are the spec that fit a corrado BBS RS 301 sizes are 17×7.5″ +33 PCD 5×100. The BBS RS- they are hard to find and fetch 3k they are rare fitment because most RS went onto BMW E30 . What stud pattern are yours do you have adapters as well . Great link here that will help you. http://www.bbsrszone.com/tag/bbs-rs/ Edited January 2, 2021 by Keyo Quote Share this post Link to post Share on other sites
Pjmur 10 Posted January 2, 2021 Cheers bud - I will check it out 👌 Quote Share this post Link to post Share on other sites
fla 9 Posted January 3, 2021 Offsets that don't require spacers and don't rub the arches are from 33 to 43 on a 7j wheel with a 205 width tyre. Quote Share this post Link to post Share on other sites
Pjmur 10 Posted January 3, 2021 Appreciate all the information guys .👍 Quote Share this post Link to post Share on other sites
g0ldf1ng3r 13 Posted January 4, 2021 On 1/2/2021 at 6:10 PM, Pjmur said: Hi. Can anyone advice please or have some knowledge on what brake system for front would suit to run with BBS Rs 17' with a ET 26 - I have the wheels but won't fit unless use 20mm spaces to clear existing calipers and then they extend beyond wheel arch - no a pretty site . Rear are perfect. I believe the existing brakes are original set up . Any advise greatly appreciated 👍 Pj you could try giving HiSpec a call as they manufacture to order & may be able to accommodate the different offset i have their Billet 4's which are 4 pots & are awesome calipers Quote Share this post Link to post Share on other sites
Keyo 47 Posted January 4, 2021 My vwms speedlines can take 6 pot atp -now that is pretty impressive for a 7.5 j alloy. Quote Share this post Link to post Share on other sites
