Scott 0 Posted August 18, 2004 Just recieved my new Kamei copy grill spoiler from GSF... seems to fit ok and once run some Silkaflex under it and glued it on to Corrado should look fine... no self tappers for me thanks!!! :mad: Problem is it needs painting - is this something I can do myself (I have sprayed stuff before but not pearl paint!) or will it need to go to bodyshop? Quote Share this post Link to post Share on other sites
greegs 0 Posted August 18, 2004 Worth spending the cash and getting it done properly. I got mine sprayed profesionally for about £25. Well chuffed with result. Here's a pic ; Quote Share this post Link to post Share on other sites
Scott 0 Posted August 18, 2004 there seems to be a gap between the spoiler and the bonnet? - this normal? Quote Share this post Link to post Share on other sites
greegs 0 Posted August 18, 2004 not sure mate not really noticed until now! Quote Share this post Link to post Share on other sites
Scott 0 Posted August 18, 2004 Weird. It looks to me as though its sitting a bit low? Might just be cos you have taken the pic at ground level :?: Quote Share this post Link to post Share on other sites
CazzaVR 0 Posted August 19, 2004 Did mine myself on my aqua blue g60 (which is pearlescent). Quite straight forward really. Just wet and dry it, a few coats of plastic primer (with a bit more wet and dry in-between), then a few coats of paint (alternate layers of spraying horizontally and then vertically), finally a couple of layers of laquer. Obviously make sure each coat is completely dry before applying the next coat. HTH. Quote Share this post Link to post Share on other sites
