Leaderboard

Rear beam needs to be mounted with both the body hangers loose as the beam eyes are mounted up. Dont torque up the beam eyes, or the hanger bolts until the the car has dropped and rolled a bit. Torque up with the wheels on the ground. That should lead to automatic squaring of the beam. Actually - has anybody noticed this before - the hangers for the rear beam are somewhat slotted on purpose. I wonder if, given the torque levels used, this was deliberate, to allow some adjustment - probably no more than 0.5 degrees (looking at the size of the slots). So, if this is correct, you are right, there is some room for adjustment. I spoke to a master tech at a VW garage just now and he said the A2 chassis (MK2s-MKivs) including the Corrado all had the slots built into the hangers to enable the rear axle to be fitted without hassle, but also confirmed that those slots come in useful, offering a "shave of adjustment ". The front K frame is more interesting - am doing it myself right now - the crucial part seems to be in getting the steering rack properly marked and resited on the K-frame when bolted in; the steering column properly settled, camber bolts being used (if needed) to get the front geometry right. Dont set the geometry until the dampers have settled for about 30 miles. The alignment team can only adjust the front wheels- but they may need to do it 3 times before it sits right.