vondribbley

As one of the three, my thanks to Paul :salute: :salute: :salute: :salute: for trying his hardest to get this going. As the car is still months of being on the road I shall sit it out until the rest of your batteries die a horrible death by full discharge and you come begging back to this cancelled group buy pleading for it to be resurrected

OK Seems 16v has the oldest corrado but what about the oldest in each engine type. I suspect the Campaigns are the oldest VR6's but I'll put mine up as a target NK015463 which makes it a late 1992 chassis (i.e. June/July 1992) by my reckoning Who has the oldest 2.0, g60 or Storm etc?

I would be interested depending on the discount - already killed 2 batteries in the last 2 years.

I have a plastic rocker cover from a galaxy VR6 sat in the garage. How about £30 posted? PM me if interested

got one for about £25 from a scrappy with only a small amount of rust as mine was shot through. So worth asking around local yards as they do come up

also thanks to g60knight - thanks for your patience

OBD-II and OBD-I on Hampshire/Sussex border just north of Portsmouth. PM me if you need it

Cheers for the info David that's pretty much as I thought Wonder why the galaxy needs such a monster then? I'll probably keep it in reserve then for when I put the big ICE in :afro:

My VR6 did have a 70A that has been replaced with another 70A recently. What I would like to know is can you fit a 150A alternator to the VR6. I've just picked up one of eBay that was on a Galaxy VR6. If you can fit it what effect on performance and battery charging will it have?

I am not an expert but... I have just fitted new OEM piston rings into my 150,000 mile VR. As far as bore wear is concerned the main problem seems to be oval wear in 1 and 6 as opposed to the bores getting bigger all round. To measure this you need to follow the guidlines in the Bentley manual. Ir there is no ovality then I would say that you should be fine fitting OEM piston rings. You need to bear in mind that they cost approx £70.00 per set (i.e. 3 for each cylinder) from VW. HTH Rob (thankfully no ovality in 1 or 6)

Having just put mine back in I don't recall having to "lock" it in. Just rotated it until the bolt holes lined up and then screwed the bolts in. Bentley manual says to replace gasket but I haven't bothered as they will come back off again soon

If the car is working then I'll happily make the dash down to Exeter

Excellent - how far off finishing do you think you are? ps don't forget to put a link to the forum when you next update your site

If its rear wheel bearing the drone can disappear/reduce when you go round a corner in the same direction to the side affected Why would being in gear make any difference? as the wheels are still turning at the same speeds

Pruned out - is that like an organic enema :shock: Seriously top job so far :D :salute: When is it going to be a sticky topic?