keithabc216v

found problem air filter box had chafed 4 cables in loom 1 being a live another earth feeding back to the fuse box causing the earths to have a live feed i wouldnt have even looked as the problem was the fuse blowing the other side bob the guy at rms diagnostic 07727065968 was brilliant anyone in east kent he,s your man for electics the time and bother he put in plus the price was fantastic thank you all for your input

went to a local engine rebuilder who got them individually mine was just the front at £6.33

found a good auto elecy goes in tomorrow fingers crossed thanks for the reply

cheers matey ive tried disconecting as much as i can with no change looks like fuse box or the alarm dunno the alarm keeps changing when i set it any way thanks once again

anyone any ideas

took switch off still did it but cheers for that one for admin why do my posts stay at 87 ?

yup an the devil might come in handy

changed ignition switch changed clocks still the same put it all back now the headlights flash with the hazards on all the other syptoms as well running out of ideas helppppppppppp

cheers for that

cheers kip corrados never do things by halves

problem started with low noise from horn now its live all the time with or without igi on that was a week ago now added to that brake warning light on with ignition on put hazards on it flashes with the indicators turning left blows fuse on indicators turn right ok put lights on dash flashes with hazards oooer put new indicator slalk and wiper stalk on changed every bulb on car it has a toad 606 alarm which works ok except stopped flashing indicators when arming or dissarming any help gratefully received

or the dash its self reading wrong ?

no but i,d like to

hope to see you sunday ? ill talk to you about it then

ITS HELD ONLY AT THE FRONT IT WILL DISENGAGE FROM THE PUMP OK YOUVE GOT TO TAKE THE CAM BELT OFF TAKE THE SPROKET OF 2 BOLTS SEAL FLANGE AND OIL SEAL THEN IT WILL SLIDE OUT BEARING IS ABOUT £7 MINE WAS SO KNAKERED IT CAME OUT NO PROBLEM HERES HOPEING THE ONLY THING THAT I THINK CAUSED THIS IS WRONG TENSION ON CAMBELT ABOUT 20K MILES AGO GOOD LUCK just a thought as the only thing the shaft drives is the oil pump might be the pump itself worn ?