nmahi

sorry its posted in 3 sections, wouldnt allow me to just sent you one message....please read from the bottom up...thank you

I read on your post that you can scan your corrado? how do i do this?

Currently now ....i have two problems rather then one.... really really sad face....:(

I see you're in Derby, im happy to pay if you have come down one day and help me out.

Currently sourcing a metering head and ISV....

Any help will be appreciated...

many thanks Bob

Problem I'm having is:

the car will run and get to temp, fans kick in and out a few time and then car cuts out. You have immediately turn the key and the car starts, idles fine, then after 5/7mins cuts out again....this is continuous until you let the car cool down and then its the same cycle.....

so far I have tried:

1. Ignition switch

2. Dizzy

3. plugs, leads, rota, cap.

4. Main ECU,

5. Ecu pump relay.

Still the same symptoms...maybe lambda probe?

Stupid me, got abit angry and i started disconnecting plugs to check sensors. while the car was running, i disconnected the left hand side plug on the metering head. The car limped a little and then died...so then reconnected this, but now the car is in limb mode...(pulling my hair out)

I'm presuming, I've knacked my metering head now? or is there away to reset them?

Hi,

Im after a little help :(

Ive been trying to get my corrado 16v 9A running properly....what a nightmare. I brought a 76K, 1 owner from new corrado, which was a non runner.

Long story short, these where the issues:

1. Both fuel pumps were dead - so these were replaced.

2. after market alarm system (no fobs) was cut out and original wiring reconnected.

3. fuel sender unit seized - replaced.

4. There was no compression, so drop a little oil down the plugs and gave it a tow start, and the beauty started.

Did you find the problem with your Corrado? 1.6?

Hi mate, after a 2.0 16v fuel unit? Posted to bham cheers bob

Hi mate, looking for 16v 2.0 underside fuel

Unit posted to bham? Many thanks bob

Hi mate, do you have a underside fuel unit? 2.0 16v? How much posted to bham? Bob

Hi mate. I got a 16v 2.0 9a corrado, do you test the injectors the same way as the 1.8? Bridge relay, Igintion on, lift metering flap?

At the moment trying this but nothing happens. Fuel getting to meteribghead fine. Also noticed the ISV not buzzing, power feed is fine