karmannski

Any opinion on this cheep idle valve? Can anyone recommend it? http://www.ebay.co.uk/itm/AUDI-80-100-A6-VOLKSWAGEN-BEETLE-CORRADO-PASSAT-1-6-2-0-IDLE-CONTROL-VALVE-ICV-/151518275238?pt=LH_DefaultDomain_3&hash=item23473166a6#ht_1384wt_958

In need of standard 16V 9a lower air box part.

you can still get them from the main deler for £16 each, + there was a set of 4 on eBay few weeks pass for £40

Hi guys just to let you all know that mk3 version of the sample in full size this time will be relised in 3 weeks time. I have made some additional changes that I hope all of you will like. The matrix was modified so the top texture will look excacly same as original with means that the side edge will have same texture. It costed me extra few hundred bucks but I thought that the OEM look is what some people are expecting. Hope that it will go well.

ok can you post it today max tomorrow it is V. urgent... ;) send me PM with PP det. pls

how much posted?

Sufflk - Lowestoft

need distributor for 16V 2.0 rado please

And how does it affect fuel consumption once fitted? Same or higher?

Hmm drop me link pls

I'm about to fit abf cams and kr inlet flow too

95

Thank you

I was thinking to do it that way but then I won't have one for the mot's. Any way can you advice what is the easiest way to convert my cat to the de cat? Never did it b4

de cat pipe wanted for 16v 9a rado please.

I'm upgrading my 16V so looking to buy an decat pipe

ABF cams wanted.

http://www.ebay.co.uk/itm/1993-VOLKSWAGEN-CORRADO-VR6-RED-/281655658799?&_trksid=p2056016.m2518.l4276

That one mate.

In good condition Pm please with prices and pictures if pos

I'm now thinking about ordering just the trims without the side clips and I will try to get somebody here in Europe to make the clips for me or just wait until they will get done. But in a mean time the old clips can be used to go on the new trim. they are glued to the trim, all you need to do is to heat up your oven to 200C then turn it off put two ends of the trim in (one by one) for 5 min, then take it out clean it spray in with an new texture and fit in to the new molding. The end bit is easy it just the front bit need a bit of trimming/cutting. And once I will get decent quality clips made by China or Europe I will let you all know. But I think that this is a reasonable alternative at the moment. What I'm also going to do now is to redesign the core to get the trim look like the original one. I mean the trim I got is silk, so I want it to look like the genuine one with that type of texture that is visible on the side edge of the trim. Hope you will all like it. Thank you.

Fitcy yes I really do want get this done as quick as possible. I have started this project not ) months ago but over 12. I'm rushing the factory to compete the clips and they now get back to me that they are more complicated than they thought and need extra 20days from now. I have contacted them today to check the progress and waiting for them to get back to me. I'm sorry that I have stopped you maybe i should not and we would enjoy new batch by now, who knows. I got the founds to pay for them so that isn't a issue. Time is the problem, it took me over 3 months to find the right people who will do them right. But any way like I said I'm waiting for the factory to get back to me with in next 48h.

side clips are on the way out from the factory. Once testet and verify possitive we will fire on with the production.

Need the follow parts, but to rusted please. Screws wellcome...as my all all rusted. https://drive.google.com/open?id=0B8lWoB6qv5s1emZNc0puVUZSWm8&authuser=0

I got one £40 + postage