jjgti
-
Content Count
154 -
Joined
Posts posted by jjgti
-
-
yes i have made sure everything is back as it should be, and yeah i know of the fuel mix screw but i know the problem isnt there, its odd because it was ok before the head was off.... and it revs as it should now i have moved the dizzy slightly and the timing belt ect is all spot on. aaaaaaaaaaaaaaahhh
---------- Post added at 9:00 PM ---------- Previous post was at 8:56 PM ----------
it was ok on idle before i moved the dizzy but it was flat and had no power and the revs were slow, and now ive moved it a touch it idles high but revs as it should
-
hey guys ive just had some work done to my head (2.0 16v 9a) new valves, skim and a general clean and de-coke and has had new valve seals etc put in. ive put it all back together and noticed it wasnt pulling as good as it used to so ive adjusted the dizzy and it has solved the problem (slow revs) but now it seems to idle at 1600rpm and is a pain when you come to a stop because it seems to want to "run away"..... i know there is a idle screw somewhere but not sure exactly where, and would rather ask some 1 who knows where it is or the best thing to do any help is greatly appreciated
-
Thanks for the help dude
-
Nice 1 for the info do u know where or what injectors i will need and the number for stealth
-
Right the car has slipped its timing and it has bent 2 valves in cylinder 1, ive taken the head off but before i fit it back i want to get it ported and polished and the valves all re seated etc. dose any 1 know of some 1 who can do this and is known for their good work and what other mods/work that could be done to improve on its air flow/ performance kr cam has been fitted
-
-
Hey guys im looking for a lightened flywheel or sme info on what would be better than the standard heavy one, have heard that it might make things worse? ( bearings etc...) and how light it safe for the engines life? Thanks
-
Its in good order but there are a couple of small bits removed from the bulk head so id advise only taking the sections you need off it. it was going to the scrappy so feel free to make me an offer for it. ;)I do need it removed asap though as it is on the street outside my house!
right ill ave it off you and ill sort something out to come get it this week and yeah ive had a word with the guy who owns a body shop who said that if i could get a shell and use the panels i need off it we could get it sorted. how dose £80 sound
-
-
hey stueyB do you still have a drivers door and the whole rear quater and arch for the drivers and the full sill for the passenger side?
-
[ATTACH=CONFIG]65325[/ATTACH][ATTACH=CONFIG]65329[/ATTACH][ATTACH=CONFIG]65333[/ATTACH]
right had a collision in the wet tonight and need to find a new inner and outer sill for the n/s and i need a o/s door and a rear arch can any1 help not having any luck finding panels, and the axle is bent but as it happens i have one of those :thumbleft:
thanks JJ
-
Well I think I'm sorted now got in touch with Bogg brothers and they are going to make me a manifold to fit r1 carbs ( was going to modify the small half of the manifold to fit them.
-
Hey all im looking for the smaller half of the inlet manifold
-
ooooohhhhh man ive been looking 2 and im having no luck. Looking for a for the rear but wouldnt mind doing the whole car depends on how much it costs
-
hey all im looking for a rear axle for my raddo, had the car for 3 months now and never noticed a problem until I checked my tyres the other day and found that it had worn down my 3 month old n/s rear tyre, to the wire on the inner edge, Looked into the problem a little closer and noticed the clearance difference on both arches, gutted it needs to be fixed asap because I have fitted coilovers and its a little tail happy when I take a right turn mwahaha and I dont fancy buying a new tyre every 3 months.
cheers any help would be much appreciated :thumbleft:
JJ
-
Was just contemplating the National Day but was meant to be going North to see me ma. Now seeing this is that weekend; sorted Bodelwyddan Castle it islegend ill see you there dude keep an eye out
---------- Post added at 1:52 PM ---------- Previous post was at 1:51 PM ----------
ive pre booked my tickets,just hope the weather is a bit beter than last yearyeah wasnt the best last year but fingers crossed it should be a good one
---------- Post added at 1:53 PM ---------- Previous post was at 1:52 PM ----------
---------- Post added at 1:54 PM ---------- Previous post was at 1:53 PM ----------
Something like that!!!not sure how it goes back together.
wwwww a 20v turbo conversion want to do that to mine when i have the funds
-
ohh no... Is it she ill haha
-
awsome man keep an eye out for a green raddo' with a black bonnet might bump into ya!
-
awsome I'll c u there
-
Hey all just a quick post to find out who's going to the VW show in Bodelwyddan Castle on the 19th and 20th of may? would be nice to fill the place with raddo's woop woop
Here is the link http://www.alltypesvwshow.co.uk/html/home.html
-
yeah ill have that off you mate, pm me with your details etc and ill send you the money
JJ
-
Nice 1 matt I have been looking all over 4 one can only find them in the USA, Is it 100% a vr6 one?
dose it look like this? if so ill ave it off ya
cheers JJ
-
hey all any1 know where i can get a vr6 water pump pulley from
cheers JJ
-
Out of interest, how much was it last year ?was paying £1600 but i diddnt care cz it was my first corrado but as soon as they said 1900 i was like c ya!
---------- Post added at 01:38 PM ---------- Previous post was at 01:35 PM ----------
Are you a convicted arsonist or something??!?haha y do you say that ?
idle speed adjustment ????
in Engine Bay
Posted
ok guys ill get on turning it back a little and will check the timing and vacuum lines again and will keep you posted on how it revs after