corradophil 3 Posted May 8, 2006 For a 1993 Corrado 2.0 16v Powerflex list two types of bushes for the steering rack. Does anyone know which is the correct one? There is no information to distinguish between them, and I'm not having much luck getting any information from Powerflex. Power Steering Rack Mount (1 per car) PFF85-232 Power Steering Rack Mount (1 per car) PFF85-233 Quote Share this post Link to post Share on other sites
Kevin Bacon 5 Posted May 8, 2006 One is wider than the other. Check what width clamp you have. VRs generally have a thin clamp and MK2s and early rados have a much wider clamp. PF are utterly useless, they don't know their own products. Same happened to me so Vince ordered both parts and that was the difference! Quote Share this post Link to post Share on other sites
corradophil 3 Posted May 8, 2006 Ok, cheers for that Kev, I'll have a measure up tonight. Quote Share this post Link to post Share on other sites
corradophil 3 Posted May 8, 2006 Right, I had a look at a mates F reg Mk2 Valver with power steering, my rack mount is identical to his. You can just about see in the photo the mount on mine is about 25mm wide. Do you know which part number this one is? Dodgy photo of mount Quote Share this post Link to post Share on other sites
