CorradoDriver 0 Posted July 23, 2006 Hey, i found this thing in the engine and it seemed to be broken its a little black box thing? I jacked this pic from a another post and made a white arrow pointing 2 it, could this be my idle problem Quote Share this post Link to post Share on other sites
CorradoVR6-Turbo 0 Posted July 23, 2006 breather pipe for the bottom pic and the top is the Idle reservoir which does naff all. :wink: Quote Share this post Link to post Share on other sites
CorradoDriver 0 Posted July 23, 2006 if thats broken would that cause problem to my car idling low and sputterin?? Quote Share this post Link to post Share on other sites
CorradoVR6-Turbo 0 Posted July 23, 2006 The top part would give you poor idle if it leaks air,as would the breather pipe broken as it will draw air in before the air flow meter,get both sorted and you should see an improvement with your idle. Quote Share this post Link to post Share on other sites
CorradoDriver 0 Posted July 23, 2006 is there a way to fix that or do i have to replace the whole pipe Quote Share this post Link to post Share on other sites
CorradoVR6-Turbo 0 Posted July 23, 2006 I have bypassed that top picture on all my VR's and the idle has been alot betre and stops stalling at junctions. I will go outside now and try to get a picture of how its done...give me 5min's Quote Share this post Link to post Share on other sites
buttles 0 Posted July 23, 2006 If it's broken you will have the mother of all air leaks bypassing your throttle body! Quote Share this post Link to post Share on other sites
CorradoDriver 0 Posted July 23, 2006 if you can get me a picture i would greatly appreciate it, Quote Share this post Link to post Share on other sites
CorradoVR6-Turbo 0 Posted July 23, 2006 Here is a mobile pic,just reroute the pipe from the black box directly into the inlet manifold. Quote Share this post Link to post Share on other sites
