smudge 0 Posted October 7, 2003 Hello just bought a VR6 - yippee! but have a few snags to fix. I am going to need a new exhaust soon and can't find a supplier for a stainless steel one. Should I persevere or just go to kwik fit? for a regular one? The throttle is very stiff but works fine - cable is fine - might be linkage? (hopefully not looks like lots of moulding to remove) Thanks Smudge Quote Share this post Link to post Share on other sites
andycowuk 0 Posted October 7, 2003 Try http://www.supersprint.com Quote Share this post Link to post Share on other sites
dazzyvr6 0 Posted October 8, 2003 you should get one quite easily,there are quite a few scotish vr6 owners on here,as for suppliers i think star performance would sell and fit it for you Quote Share this post Link to post Share on other sites
vr6storm 0 Posted October 8, 2003 whatever you do don't get a plain steel one from anywhere other than VW!.....also Miltek's S/S cat-back is cheaper than the stock VW system so you are as well "upgrading" and as dazzyvr6 has pointed out......star-performance in glenrothes are your best bet for selling and fitting you one Quote Share this post Link to post Share on other sites
smudge 0 Posted October 9, 2003 Thanks for you help. Will definately go to Glenrothes when the time comes. Cheers Smudge Quote Share this post Link to post Share on other sites
Supercharged 2 Posted October 9, 2003 whatever you do don't get a plain steel one from anywhere other than VW!.....also Miltek's S/S cat-back is cheaper than the stock VW system so you are as well "upgrading" Yes the VW ones are much better grade metal than the stuff you get from Kwicksh** and last ages but if you need more than one section you may as well get a custom system with a lifetime warranty - the Powerflow one on mine is proper off the hook! Quote Share this post Link to post Share on other sites
Guest Posted October 10, 2003 wheres a good place to look for the Miltek? I have no links to sites on my poota anymore after a reinstall :( Thera Quote Share this post Link to post Share on other sites
dazzyvr6 0 Posted October 10, 2003 awesome gti sell miltek as well as amd Quote Share this post Link to post Share on other sites
Fine wine, Belgian chocs. 1 Posted October 10, 2003 I'd be surprised if kwik fit could do you an exhaust anyway. The only pattern exhaust manufacturer to do one for the VR6 is Walker and it'll cost you £250-£300 fitted. I had one on mine for six months and never got it to fit without knocking. It was manufactured like the Volkswagen one too, with the middle and back box in one piece so you have to drop the back axle to fit it. Lovely job. Hacked mine off with a gas axe after six months and put a Magnex on. It's lovely. Fits perfect, nice sound, smashing. :D Quote Share this post Link to post Share on other sites
