dash removal

[allinzell 0]

can anyone help nearly go dash out something holding at the top cant seem to find anyone got any ideas.

[dirtytorque 0]

have you removed the two screws from the engine bay side?

[shaung60 0]

Here is a photo of a removed dash. It shows where the two bolts are at the top of the dash. I think it's a 10mm spanner to remove the nuts.

2008_0928Image0155.JPG[/attachment:8pmepj9u]

[lilfuzzer 1]

Here is a photo of a removed dash. It shows where the two bolts are at the top of the dash. I think it's a 10mm spanner to remove the nuts.

2008_0928Image0155.JPG[/attachment:2hsaqqu4]

Shaung60 right 10mm bolts but bit of a twat with fat fingers like I have may be easier with the wiper motor off

[shaung60 0]

Here is a photo of a removed dash. It shows where the two bolts are at the top of the dash. I think it's a 10mm spanner to remove the nuts.

2008_0928Image0155.JPG[/attachment:3e2map1m]

Shaung60 right 10mm bolts but bit of a twit with fat fingers like I have may be easier with the wiper motor off

I used a ratchet spanner which helped speed things up.

[lilfuzzer 1]

Here is a photo of a removed dash. It shows where the two bolts are at the top of the dash. I think it's a 10mm spanner to remove the nuts.

2008_0928Image0155.JPG[/attachment:2salsw3t]

Shaung60 right 10mm bolts but bit of a twit with fat fingers like I have may be easier with the wiper motor off

I used a ratchet spanner which helped speed things up.

 

Good shout mate prob would have been better!