got fuel but no spark

[Blackburry 0]

Im working on a 90 G69

I have fuel and power to everything.

 

i have power to the coil and the hall sender plug.

but i have no spark from the coil even changed it to a new one.

also got new spark plugs, wires,cap, and rotor all ground are good..

Timing is set it turns over but no spark.

:(

anyone got any answers? :?

[Supercharged 2]

Broken distributer shaft or knackered hall sender?

 

Welcome to the forum btw...

[Blackburry 0]

i have changed everything: Distributor, cap, rotor, plug, wires, even digifant still no spark.

 

am i missing something?? HELP!!!!!! :scratch: :confused4:

[dirtytorque 0]

How are you checking for a spark btw?

Maybe change thye ecu relay or the ignition switch.

Have you definately got 12 volts to the coil?

Maybe 1st check with the help of a mate that you have a voltage to the coil black wire while cranking..

[Blackburry 0]

i have changed everything: Distributor, cap, rotor, plug, wires, even digifant still no spark.

 

am i missing something?? HELP!!!!!! :scratch: :confused4:

[Supercharged 2]

As above have you changed the ECU power relay and ignition switch?

[Blackburry 0]

gettin relay tomorrow

[flusted 0]

check for the live at coil on cranking, as above could be ignition switch

[Blackburry 0]

well i got it running but now fuel pump doesnt work. if i run a hot wire it runs but its not working with the key anymore any ideas? :mad2: :confused4:

[Supercharged 2]

Again - have you changed the ignition swict and the fuel pump + ECU relays??

[Blackburry 0]

changed switch and relay.. fuel pump was workin before u could hear it before u cranked car now just nothing

[Mawrick 0]

Are you 100% positive all your grounds are ok?.......

 

Also if you haven't done it I would remove the distributor cap to check that the rotor is still in it's place, I had it once fool me when it had jumped of it's rod........