carrots 1 Posted March 15, 2011 just done the head on my 1.8 16v .its all gone together fine and runs fine.only prop is ive got a clear pipe vac tube that i cant find where it goes.it runs from air box side along bulkhead and stops in middle of bulkhead .at first i thought it mite be off ecu but its not.it is sucking air if you put your finger over it so must go somewhere.please help Quote Share this post Link to post Share on other sites
one_eyed_willy 0 Posted March 15, 2011 bottom of the air intake just before it goes into the throttle body maybe? think thats where it goes on the 2.0 16v so not sure if its exactly the same Quote Share this post Link to post Share on other sites
CazzaVR 0 Posted March 15, 2011 Yep, reckon it's that one too. Quote Share this post Link to post Share on other sites
carrots 1 Posted March 15, 2011 its going the opp side of air intake.it stops near ecu area Quote Share this post Link to post Share on other sites
one_eyed_willy 0 Posted March 15, 2011 (edited) http://the-corrado.net/showthread.php?46126-How-to-clean-out-16v-throttle-bodies-with-PICS not the one highlighted in pic 2? need to get out and take loads of pics of my engine bay really, bloody nightmare trying to find decent pictures on the net Edited March 15, 2011 by one_eyed_willy Quote Share this post Link to post Share on other sites
carrots 1 Posted March 15, 2011 none of them on pic.its a stiff pipe thats near the coil.cant take any pics as car in garage Quote Share this post Link to post Share on other sites
one_eyed_willy 0 Posted March 17, 2011 any luck yet? Quote Share this post Link to post Share on other sites
