quicky1980 0 Posted November 4, 2011 any news on these? Quote Share this post Link to post Share on other sites
8vMatt 1 Posted November 4, 2011 any news on these? I've not progressed this yet as I've been waiting to make sure there are no fitment issues with the parts I've had in. This will give me the answer in the next week or so. I expect them to be fine. Once everything is sorted I will move on with it with the manufacturer. Cheers for your interest mate. Quote Share this post Link to post Share on other sites
quicky1980 0 Posted November 5, 2011 Great news, started my next project and the wings on it are rotten. Quote Share this post Link to post Share on other sites
VAG-hag 0 Posted November 9, 2011 Matt, you still need wings to send? I can offer mine up..... only thing is we live a fair way away!! Quote Share this post Link to post Share on other sites
Jim Bowen 1 Posted November 9, 2011 i'd be up for a pair of late front wings, but would paint them rather than have the polished carbon look. Quote Share this post Link to post Share on other sites
Redfox 10 Posted November 15, 2011 Just a question: Would late type wings fit earlier type cars? Cheers, Redfox. Quote Share this post Link to post Share on other sites
dragon green 5 Posted November 15, 2011 Just a question: Would late type wings fit earlier type cars? Cheers, Redfox. Yes Quote Share this post Link to post Share on other sites
VAG-hag 0 Posted December 13, 2011 ... any news Matt? Quote Share this post Link to post Share on other sites
Abdul 0 Posted December 13, 2011 Will the lips be present or not? I'm assuming you cant just roll carbon arches lol. Quote Share this post Link to post Share on other sites
VAG-hag 0 Posted December 13, 2011 Should be easy enough to cut though Quote Share this post Link to post Share on other sites
quicky1980 0 Posted December 13, 2011 still hoping that these can be made without the indicator holes. will be needing them in 2012 for sure. Quote Share this post Link to post Share on other sites
8vMatt 1 Posted December 13, 2011 The company I used for the other parts haven't proved to be upto the job. The look and finish is very good but the fitment caused issues. I don't want to take a risk with them for these wings. Sorry guys, back to the drawing board. Quote Share this post Link to post Share on other sites
87 Jetta 16v 0 Posted December 13, 2011 If you find a quality supplier, I will be definately be interested Quote Share this post Link to post Share on other sites
Jam.e.s 0 Posted December 18, 2011 I am also interested, if I could get direct shipping to Canada for a decent enough price. Quote Share this post Link to post Share on other sites
VAG-hag 0 Posted December 19, 2011 ah shame..... thanks for trying Matt. Quote Share this post Link to post Share on other sites
dogger 10 Posted December 20, 2011 I'd be down for making them but I don't think cost wise it would be in the price range that would make everyone happy. Tooling for infused composite parts is not cheap plus you need two molds that are of fair size and probably multiple pieces. The parts themselves would be a bit costly too. I've seen no mention of prices in here but good quality composite parts in low volume aren't cheap. This is a very low volume part so the tooling costs can't be absorbed as easily. Fiberglass/glass fiber would be much more cost effective and work well. Tooling is about half the cost and the parts would be less as well. One problem with having parts made in China is they don't have a Corrado there to use for fitment. Its not like once the mold is finished they can take the first part out of the mold and check fitment on a car before going ahead with production. Quote Share this post Link to post Share on other sites
bobsinclare 0 Posted January 21, 2012 hi id be interested also CF wings Quote Share this post Link to post Share on other sites
VAG-hag 0 Posted January 21, 2012 Dogger - do it mate!! im sure they would sell pretty well Quote Share this post Link to post Share on other sites
quicky1980 0 Posted January 21, 2012 agreed, do it! Quote Share this post Link to post Share on other sites
Dude VR6 0 Posted January 21, 2012 Someone needs to give Dogger a big poke one this one, as I also would buy a set Quote Share this post Link to post Share on other sites
quicky1980 0 Posted January 21, 2012 agreed, do it! Quote Share this post Link to post Share on other sites
dragon green 5 Posted January 21, 2012 It's the shipping that's going to cost ! But if there's enough interest I'm in Quote Share this post Link to post Share on other sites
Critical_Mass 10 Posted January 21, 2012 Id be interested in some fibre glass wings. Like the idea of carbon, but cant justify the cost for them. Whats the ball park figure for tthe fibre glass front wings? Quote Share this post Link to post Share on other sites
8vMatt 1 Posted January 21, 2012 Hey guys, Thanks for the continued interest through this process. So the Chinese company proved to be a false dawn but I'm not one to give up at the first hurdle! This is where we are at the moment. We are working together with a company specializing in Carbon and Kevlar construction. This is not going to be a garage workshop project. We are taking the necessary time to make things work out properly and that means a long time working on the molds. We are looking to add a little twist and accomodate you guys who would want to run with slighter wider wheels. But keep the original looks also. No details at this time but thats the plan. No pricing details as its too early in the process. I'm sure fibreglass canbe looked into if the demand is there. Watch this space......but it might be a while :bonk::thumbleft: Quote Share this post Link to post Share on other sites
MaverickG60 0 Posted January 22, 2012 Matt, Sounds promising! I'm sure I speak for most when I say thanks for all your efforts in trying to tee something up as it seems to be proving quite difficult at the moment. Bonnet could be something to look in to as well, especially for weight saving! Quote Share this post Link to post Share on other sites
