Trim below window screen - passenger side

[VR6Pete 0]

While I was replacing the foliage seal, the trim above the heater motor you need to remove as part of this has been siliconed on..... and I mean, good and proper bodge job.... the part it's is missing some of the mounts that attach it to the clips under the window screen, so I need another one that is in tact, as I already have the new clips to secure the trim to the car.

 

I want to do the job properly :)

 

Cheers

Pete

[TimDoc 0]

I think I have this - vag cat is down currently so cant send you a picture - is this the grille above the intake that is covered by the rain cover??

 

Tim

[VR6Pete 0]

hi mate, yeah I think that is the one :) I thought I took a photo of it, but seemingly not! however, this is the trim, its the peice held down with the screw, and has 3 clips mounts on the back of it :)

 

[TimDoc 0]

Ah - right, not what i was talking about - this is the left part of the three-part scuttle tray that catches the water. it's normally siliconed down with the vw black really sticky silicone. You will most likely have to get a complete set from someone breaking or maybe someone will have done the same whilst breaking a car but to the other parts??

 

Good luck finding one

 

Tim

[rodmax 0]

Hi i'm sure i have one,will check & send you a pm later

rod

[Kevin Bacon 5]

it's normally siliconed down with the vw black really sticky silicone.

 

They're actually clipped down but Shonky screen fitters *always* break them and it's them who stick the panels back down with sticky mastic schitt :D

[VR6Pete 0]

Cheers Rod..

 

I'm doing this build properly so want to make sure I use clips... silicon is the devils work :)

[VR6Pete 0]

Hi i'm sure i have one,will check & send you a pm later

rod

 

hey mate, did you manage check?

[rodmax 0]

Hi .its still there ,no damage to it

will send you a pm

rod

[VR6Pete 0]

cheers Rod