Andy92 0 Posted March 13, 2004 Any one seen - http://proficientperformance.com/Mercha ... re_Code=PP This is a bolt on for a VR6 isnt it ? What would be the deal using this instead of a G-lader ? Wouldit be as powerful or a waste of time ? If you geared it down with a smaller pulley to make use of fact that its a smaller engine. PS main page - http://proficientperformance.com/ Quote Share this post Link to post Share on other sites
Kevin Bacon 5 Posted March 13, 2004 Stage 2 only includes:- Larger Bosch Injectors. Pulley. Stage 2 GIAC Chip. Race Bypass. You need the Stage 1 first, which is the charger and pipework. Costs a lot more than $970! K Quote Share this post Link to post Share on other sites
Chris VR6nos 0 Posted March 17, 2004 Tee-Hee I have that kit on my VR, stage 1 costs £2500 plus £500 fitting and runs at 6psi but can go to 23psi, this over feeds the VR6 with positive pressure so i think it would give a bit too much to the 1.8 engine unless you put a bigger pulley on to lower the gear ratio but what's the point, it's a VR charger! Chris Quote Share this post Link to post Share on other sites
CoxyLaad 0 Posted March 17, 2004 have you got the stage 1 or 2 kit on yours chris? That website says a stage 1 kit only gives a 20bhp increase? Surely that cant be right? Who would pay 2500 quid for 20bhp? There was a bloke called tom ingram had a supercharged vr which had a proven 274bhp. Dunno what stage he was running though... Quote Share this post Link to post Share on other sites