P3rks 11 Posted November 22, 2011 Hello Everybody! (in Dr Nicks voice) I need some hubcentric PCD adapters to make some BMW wheels fit my VR6. So I need: 5x100 (57.1 centre bore) to 5x120 (72.5 centre bore) I need a pair 20mm which are easily found, but I also need a pair of 22mm. Can anyone recommend a company who can make these up? Everyone I've tried are just not getting back to me. Thanks. Rich. Quote Share this post Link to post Share on other sites
VR6 0 Posted November 22, 2011 Hiiiii Dr Nick. Where from = Suppliers forum. Quote Share this post Link to post Share on other sites
bristolbaron 10 Posted November 22, 2011 Prob easier and cheaper to get 3mm taken off some 25s.. there was a guy on e38 doing them But can't remember who :( Quote Share this post Link to post Share on other sites
seanl82 23 Posted December 10, 2011 Hotgolf on CGTI will probs do em. He lightens flywheels so this should be simple enough for him to do. Top bloke and well recommended by all who have used him too. Also a very quick turnaround. :thumbleft: Quote Share this post Link to post Share on other sites
G60_Marc 0 Posted December 10, 2011 http://www.G23engineering.co.uk http://www.edition38.com/forums/index.php?showtopic=413916 Quote Share this post Link to post Share on other sites
