Rams 0 Posted June 6, 2012 Hi all Looking for an OBD2 inlet pipe, the one between throttle body and maf for a vr6. It's the pipe with the deleted hole for the built in ISV the obd2 uses. Just missed out by 50p from one on eBay! Sold for £10.50. Thanks Ramsay Quote Share this post Link to post Share on other sites
lilfuzzer 1 Posted June 6, 2012 Mate ill take a look tonight if I have one Quote Share this post Link to post Share on other sites
lilfuzzer 1 Posted June 6, 2012 Hi mate I have one but has a split of an inch round at the throttle body end next to the hose clip. Just thought though you can buy a forge delete plug that may work as I got one for the turbo one as needed to relocate the isv. I'll trry and find a link if i can ---------- Post added at 8:00 PM ---------- Previous post was at 7:55 PM ---------- Hi mate I have one but has a split of an inch round at the throttle body end next to the hose clip. Just thought though you can buy a forge delete plug that may work as I got one for the turbo one as needed to relocate the isv. think they came with dump valve kits maybe some on ebay? ---------- Post added at 8:02 PM ---------- Previous post was at 8:00 PM ---------- http://www.ebay.co.uk/sch/i.html?_from=R40&_trksid=p5197.m570.l1313&_nkw=forge+blank&_sacat=See-All-Categories May get you going for now till you find one bud. Quote Share this post Link to post Share on other sites
KADVR6 0 Posted June 6, 2012 have you tried ford as they are about £45 new from them i think, or fit this one and never have a split pipe again http://www.awesome-gti.co.uk/product.php?xProd=37267&xSec=86 Quote Share this post Link to post Share on other sites
