bigbaz 10 Posted February 25, 2013 Hi just had my ecu open to see what chip it has its a psd g60 st5 250cc with a 68mm pulley could anyone give me some info on this chip please cheers Quote Share this post Link to post Share on other sites
bristolbaron 10 Posted February 25, 2013 The best I can offer is PSD [pitstop developments] offered SNS stage 5 chips, 250cc would be standard green injectors and the chip was run with a 68mm pulley. If the car still matches this spec then all's good! http://snstuning.co.uk/g60.php Quote Share this post Link to post Share on other sites
bigbaz 10 Posted February 25, 2013 All good then it still has a 68mm pulley only drove the car about 2 miles before I started the strip down went well what sort of bhp would it be Quote Share this post Link to post Share on other sites
bristolbaron 10 Posted February 25, 2013 hard to say bud, 180-200 depending on other factors.. ? Quote Share this post Link to post Share on other sites
Jim 2 Posted February 25, 2013 Agreed with Baz.. really depends on other modifications, etc. Quote Share this post Link to post Share on other sites
bigbaz 10 Posted February 25, 2013 Standard as far as I know except 4 branch and decat system Quote Share this post Link to post Share on other sites