sparks 0 Posted April 14, 2013 hi im renewing all the front ball joints and tie rods just looking after a good brand im getting QH and moog come up just wondering what everyones thoughts are on this Quote Share this post Link to post Share on other sites
bmwcompact 10 Posted April 14, 2013 If you want a good brand buy Lemforder from Carparts4less. Assuming you have a VR6 then its £17.94 for a ball joint and £10.92 for a track rod end. Lemforder probably made the originals. I doubt anyone will sell these at a lower price. If thats too expensive then I've used QH, TRW and Febi for example: better not to buy anything off Ebay thats not branded and is very cheap. Quote Share this post Link to post Share on other sites
vw rule 19 Posted April 14, 2013 I've bought mine and loads of other parts from AVS Car Parts The Tie Rod Only The 1.8 / 2.0 16v and G60 part n.o: 1160307138 price is £12.42 plus VAT The VR6 are part n.o 1160307184 price is £13.98 plus VAT The make / manufactuer for both is MEYLE Or to buy the tie rod complete with the track rod end is. The 1.8 / 2.0 16v and G60 (left side) part n.o: 01163 price is £22.62 plus VAT The 1.8 / 2.0 16v and G60 (right side) part n.o: 01169 price is £22.62 plus VAT The VR6 (left side) part n.o 08052 price is not listed so may have to contact them (VR6 with TRW steering rack) VR6 (right side) part n.o 08051 price is not listed so may have to contact them (VR6 with TRW steering rack) The make / manufactuer for both is FEBI You can order off the internet at AVS Car Parts or phone them on 01760 336933 This company does most of the Audi, Seat, Skoda, and VW parts. Hope this helps. Si :thumbleft: ---------- Post added at 4:45 PM ---------- Previous post was at 4:20 PM ---------- Hello there I bloody forgot to put the Ball Joint prices up here for you as well :bonk: Front lower ball joints The 1.8 / 2.0 16v and G60 part n.o: 03548 price is £8.22 plus VAT (complete with new bolts) the make / manufactuer is Febi The VR6 part n.o is 1160107184 price is £11.58 plus VAT (complete with new bolts) the make / manufactuer is Meyle Si Quote Share this post Link to post Share on other sites