VR6 Ignition leads... VW no longer supply! :(

[robrado974 1]

How come you have wired them not following the grooves normally?

 

Might be on purpose or an error or the lead lengths? I just noticed them crossing over and am curious.

Oops my mistake ! They are the correct lengths , yes your right I have got two in the wrong grooves , I will change them over tomorrow . Well spotted . Just to clarify they do fit spot on though .

Rob

[Jim Bowen 1]

That's what happened with mine after the mechanic replaced the sparks :-(

 

I use the tool to remove them. Have removed them so many times and never had an issue. I'm going to stick up for the beru leads. Although I said the same about the coil pack and it broke later that week.

[Jamie 1]

Same here - always use the tool although it's not like you have to do it very often

[-=Kris=- 0]

I didn't have the tool... I bought one off the back of this.

[VAG-hag 0]

Yes please Chris!

 

Pm me your details and I'll get payment over to you mate. :thumbleft:

 

Pm sent mate. My inbox should be able to accept messages now. Cheers, Chris

[VAG-hag 0]

You are a Forum hero matey and a nice chap to boot :salute:

 

Oh stop it, you're making me blush!

[annavr6 10]

magnecore when setting them up (i have 8mm blue ones in my vr6) to sell at heritage i found out

 

The 7mm ones they do come only in black

The 8mm ones they do come only in blue

and i think the 8.5 or 10mm ones were red IIRC

 

I have teh blue ones fitted they just about fit int he plastics on my VR6 with some force an filing. I have some BBT black leads to go in mine as i want the original look not too sure what they are like, i was given them adn have heard good and bad things about them.