Jump to content
Rich the Chef

Front and rear top mount bumpstop upgrade vr6

Recommended Posts

Just looking to fit new top mounts and stops to my VR6 Corrado as I'm putting some coilovers on. I figure it's worth popping new on while its in bits and then I only track and camber once.

What is needed and who or what's recommended?

Poly or standard?

I don't want to miss anything out and want to put a full strut with all new parts in place of the OEM stuff.

Thanks

Share this post


Link to post
Share on other sites

I'd go for VAG or OEM quality parts, don't go poly for the top mounts as it will be too stiff in my opinion. The rear lower mounts are only available through VW Classic Parts or Heritage in the UK. Lemforder do repair kits for the front and rear top mounts and are decent quality - I can get the part numbers for you if you need them.

 

These are the VAG part numbers:

Front strut mount 357412331A x 2

Front strut top mount bearing 1J0412249 x 2

 

Rear strut mount upper 191512335 x2

Rear strut mount lower 191512333 x 2 (only available from Classic Parts)

 

Bump stops etc. should be readily available.

Share this post


Link to post
Share on other sites
I've just bought a Febi kit of upper and lower rear mounts. Just looking for the fronts and I'm all set. Awesome.

 

Hey, would you have the links to the front and rear kits you purchased please?

 

Thanks!

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...