delfinis38 1 Posted February 3, 2016 Anyone got a solution how to put them back in the switch. Or an alternative method of keeping the switch tight in door card.. Learnt my lesson that I need to disconnect the plug at the back rather than removing switch. Can't find the spring clip at moment hoping it's stuck to the speaker magnet. Quote Share this post Link to post Share on other sites
Jim Bowen 1 Posted February 3, 2016 I have wrapped electrical tape around some switches, then just push them into the hole Quote Share this post Link to post Share on other sites
delfinis38 1 Posted February 3, 2016 I have wrapped electrical tape around some switches, then just push them into the hole good idea.. was even thinking of a tie wrap round the back. I have too much time on my hands to worry about these things :) Quote Share this post Link to post Share on other sites
Cressa 44 Posted February 3, 2016 I found 2 spring clips in the bottom of my door card which explained why the switch was always loose. I refitted them and all was good. .. but it's come off again. I like the tyrap from behind idea as it's such a tight fit anyway Quote Share this post Link to post Share on other sites
fla 9 Posted February 3, 2016 Stick some black felt around it. Matt in colour and gives it a better 'feel' when refitting. Quote Share this post Link to post Share on other sites
