dickie 0 Posted July 10, 2016 Hi, I've got an issue with the inside of my wheels clashing with the original vr6 calipers as they're quite bulky. Do the 288 & 312 caliper set ups have a neater less protrusive front design on the caliper that gives anymore clearance between the disc and rear of the wheel? Quote Share this post Link to post Share on other sites
sexybourbon 0 Posted July 11, 2016 No there bigger , dont fit under the origional dpeedlines i font think Quote Share this post Link to post Share on other sites
Supercharged 2 Posted July 11, 2016 I think the calipers actually run closer as the 288 setup just about fits under OE 15's but runs very close. Quote Share this post Link to post Share on other sites
swiftkid 1 Posted July 11, 2016 312's don't fit under standard speedlines, thats 100%. 288's are tight but fit nicely as I ran them, I don't think theres bucket loads of difference between the calipers. What wheels do you have? Quote Share this post Link to post Share on other sites
dickie 0 Posted July 12, 2016 Fifteen52 formula tr, they're 8x16 et30 but I've had to put 17mm of spacer to clear the front caliper which is too much for my liking Quote Share this post Link to post Share on other sites
