carrots 1 Posted December 12, 2018 just got out of car and I could feel steel on the drivers seat bottom side bit.is it a hard job to do ive done a quick search and it looks like you cant buy new foam .another job to the list Quote Share this post Link to post Share on other sites
seanl82 23 Posted December 12, 2018 It’s an easy job but as you’ve mentioned, you won’t find a replacement unless out of a passenger side seat that someone is breaking. A good upholsterer may be able to make you a new one based on your current one though Quote Share this post Link to post Share on other sites
carrots 1 Posted December 12, 2018 can you tell me what I need to do to fit um.cheers Quote Share this post Link to post Share on other sites
seanl82 23 Posted December 12, 2018 Remove the seat from the runner, separate the back from the top by removing the bracket trim and securing pins, then you'll see the teeth that are holding the covers in place. Just peel them back gently with a flat trim tool or screwdriver and take it off. The bolsters then just lift off. Reverse to fit the new one, Job done. :thumbleft: Quote Share this post Link to post Share on other sites
carrots 1 Posted December 12, 2018 cheers doesn't sound to bad to do Quote Share this post Link to post Share on other sites
seanl82 23 Posted December 12, 2018 The only problem you'll have with removing the top, is the headrest leg trim things as they are quite difficult to remove from the seat backs. Be careful on the tilt handles when removing them too. Quote Share this post Link to post Share on other sites
