VR6 Wheel bearing and hub

[Ostkakan 11]

Hello Everyone!

I have bin trying to change my bearing,hub and new driveshaft.

What i dont understand is why my hub pressing in to far in to the bearing? Its press so far it touching my abs sensor and even the knuckle and then i cant even spin the hub

Should it be a stop somewhere?  I do support the inner bearing when i pressing in the hub.

Already destroyed 1 bearing... Second try i stopped close to the sensor and knuckle put everthing thogether when i starting to screw the axel bolt i saw the hub moveing in more and toching the sensor i dont dare to press in more...

I have checked out all youtube clips how to do it and its kinda straight forward job so i dont know what i do wrong here?

This is what i have bought:

SKF Wheel bearing VKBA 1491

SKF Driveshaft VKJC 1037

JP*Group Wheel hub 1H0407613B

Edited July 5, 2021 by Ostkakan

[Dox 22]

You push the bearing into the housing using the outer part of the bearing race only.

 

then you support the inner part of the bearing at the rear as you push the hub into the bearing.

hope this makes sense? 

[Ostkakan 11]

7 minutes ago, Dox said:

You push the bearing into the housing using the outer part of the bearing race only.

 

then you support the inner part of the bearing at the rear as you push the hub into the bearing.

hope this makes sense? 

Yeah done exactly like that still the hub goes to far in when i press the hub. Doing like this /watch?v=-dXSo2BkaY0

The bearing it self, dosent matter witch way it goes? they look the same front and back

Edited July 5, 2021 by Ostkakan

[Dox 22]

Compare new hub with old?

 

bearing with old outer part of bearing?

[Ostkakan 11]

39 minutes ago, Dox said:

Compare new hub with old?

 

bearing with old outer part of bearing?

Looks the same

[Cressa 44]

This has been raised before with different people having the same problem. I will do a search and see if I can find it. Its 5 years since I did mine but remember it being a pig. 

[Ostkakan 11]

21 minutes ago, Cressa said:

This has been raised before with different people having the same problem. I will do a search and see if I can find it. Its 5 years since I did mine but remember it being a pig. 

Thanks mate. Im clueless about this.

[Cressa 44]

May help

 

[Ostkakan 11]

11 hours ago, Cressa said:

May help

 

Thanks, Sad that i cant see the pictures. So it should work if i change to febi hub?

[Ostkakan 11]

Bought new bearing yesterday gonna try the old hub. Update will come.

[Cressa 44]

8 hours ago, Ostkakan said:

Bought new bearing yesterday gonna try the old hub. Update will come.

Goodluck with that. Hopefully will be good this time

[Ostkakan 11]

14 hours ago, Cressa said:

Goodluck with that. Hopefully will be good this time

Yeah hope so! Wanna do some driveing this summer :)

[Ostkakan 11]

I got the other wheel bearing, it doesn't matter what side it goes in? One side with text and other none

[Cressa 44]

Well the wheel bearing looks correct in the hub as the the circlip fits in the groove, so that can not be wrong

Which leads me to the ABS ring  not sitting in far enough

[Ostkakan 11]

New bearing in!

Mabye some diffrent with new and old hub. I have to use the new abs ring on the old hub... the old one is broken

[Ostkakan 11]

It worked much better with old hub and i could torque it down.

The abs ring touching slitly on the abs sensor but i move the sensor abit back.

Now i have abs light on didnt have it when i used the new hub i guess the sensor is bad.