Leaderboard

Managed to dismantle clean resolder and repair this. Will post some pics shortly, but as David said they're glued together, as well as having a locking 'lip' on the inside. Heat with a hairdryer for as long as you can hold it. Then use some jewellers screwdrivers down each of the longer sides. Carrefully but firmly hold the washer nozzle and gently ease it out of the outer casing. On mine the connection had corrodes, but this was cleaned with emery cloth and the cable resoldered and supported with heat shrink. Be careful when removing the connectors that sit either side of the heater block as they can be easily damaged. ---------- Post added at 10:10 PM ---------- Previous post was at 10:08 PM ---------- using the hairdryer has the added advantage of rejuvenating the colour from a faded grey back to black! Also gives you a chance to polish the area where the nozzle sits.