vw bobby

Looks amazing as well, this guy has got some serious talent

Hi All, Just found this link and thought I would share it on here: http://www.motorgeek.com/viewtopic.php?f=6&t=53750

Hi mate would you consider 16" teledials?

up

Hi All, I have a set of 7 x 16" Porsche Teledials ET 52.3, 5 x 130 PCD and no adapters. These have 2 x brand new 225/50/16's and 2 x very good used 205/55/16's Comes with centre caps, wheels will need a re-lacquer. Located in Hounslow, Middlesex, London Looking for £400 ono

up

up

The only instructions that came with the bolts, were they were pre oiled

Unfortunately I cannot remember the name of the manufacture and through the packaging away. These were bought from GSF though, and will be taking the bolt back tomorrow to demand a refund. Here is a few pics of the bolt:

The bolts were from GSF,and yes I did blow the bolt holes out first

I am not to sure mate, so I don't want to say yes and then it will not fit

Hi All, I need some help, I am doing my cylinder head gasket on my jetta 16v KR engine. Basically I put the head on and was tightening the new head bolts and number 10 bolt snapped. The stages I am doing is: 1. 30 lb/ft (40nm) 2. 44 lb/ft (60nm) 3. Quarter turn 4. Quarter turn The head bolt sequence I going by is: Exhaust: 10, 4, 2, 6, 8 Inlet: 7, 5, 1, 3. 9 I was on the first stage and number 10 bolt snapped? Any ideas why this would happen? Cheers Bobby

Hi All, I have an Audi S2 inlet manifold that has been modified to fit the VW popular 4 cylinder 16v engines such as the ABF, KR, 9A etc there is no fuel rail injectors. It has had one of the runners removed and a flange welded on with the bolt pattern of the ABF/2E throttle body. (TB may need slight modification to fit). Welded on the underside is a plate to allow fit for the std VW 1.8t inlet sensor, two vacuum nipples, an AN 8 fitting, two mounts for a bracket and on the end a take off for the brake vacuum pipe. Lugs welded onto the runners are for a std 1.8t fuel rail and injectors to bolt to. A rare item perfect for people wanting to turbo or supercharge their car. Located in Hounslow, Middlesex, London. Looking for £350 Cheers Bobby

Hi All, I have a Turbo Technics Kit for a 1.8 16v KR engine. Looking for £550 for the lot. Collection in Hounslow, Middlesex, London Cheers Bobby

oh right, so that is why they are that price

I was just browsing thorough ebay and found this leather interior that is for a LHD car, so same as the one I have for sale. But that PRICE? WOW http://www.ebay.co.uk/itm/Volkswagen-Corrado-Leather-Interior-RECARO-RARE-VR6-/141150671307?pt=UK_CarsParts_Vehicles_CarParts_SM&fits=Model%3ACorrado&hash=item20dd3c51cb So mine must be a bargain?

pm'd

price drop £550

States the price in the advert £575

My new air filter:

No these are used mate, which have been used for 3000 miles

Cheers mate

My new shocks:

up

Dam it, I had a feeling I will need to open the dash up again :(