vw bobby

Hi all, Basically I can get my hand on a 1.8T complete engine with loom, and ignition barrel and key, so basically everything i need. I am not sure which model the engine is, but can find out later tonight. Also how can I tell what engine code the engine is? I have a 1991 corrado KR 1.8 16v and my question is this a straight fit into my engine bay? will it fit onto my subframe, will I need to alter the driveshafts and will the loom just plug into my original loom, will I need to change the gear linkage and lever, will I need to change the pedal box, ect? Can I do the conversion over a weekend? How easy will this be to do? Please shed some light on this and share some thoughts please. Cheers Bobby

if fall through I will take this please

Hi all, I have a 1991 corrado 1.8 16v KR engine and I am looking for the plastic fuel pump housing that goes underneath the car, here are a few pics of what I am talking about? As I have cracked mine as my car is too low? Cheers Bobby

Yes its the suitcase one, cheers for the info mate. If I wanted to replace that box with a smaller one is it possible to do?

Hi all, I have a 1991 corrado 1.8 16v and have got a stainless steel exhaust system on there at the moment. Basically my car is sitting very low and the centre box scrapes alot (i think). I also get a tinny noise when I move off in 1st gear and when there is a uneven road surface. The exhaust is loose, so I need to change the exhaust mountings. So I am assuming its just my centre box scraping the floor or is there a heat plate that could be loose and making this noise. Basically can I remove this centre box and put a straight pipe in for a replacement and only run the rear box? And is there a heat plate, that could be making this tinny noise? All help is really appreciated Cheers Bobby

Cheers mate

I have got this kit, and want to convert my 1.8 16v what else would I need to to do for this conversion?

Cheers mate, and yes it was, I got it from a guy selling on ebay

Hi All, I have just recently come back into the dub scene and have bought myself a Corrado, the car I always loved from when they first come out. It a 1991 1.8 16v on Corvette C4 Sawblades 8.5" x 16" with 195/45/16's on the front and 9.5" x 16" with 205/45/16's on the back. Hope you guys and girls like it. Also I will be asking probably alot of help in the future, as I plan to turbo the engine to make it a 1.8 16v Turbo Here are a few pics of my pride and joy. Cheers Bobby

Here is a few pics of mine, I know they are terrible pics, sorry for that:

Thanks a lot DiamondTony and yes I am finding the forum very helpful

Cheers mate, just read the spec of yours, sounds crazy, how much power you pushing in that?

Thanks a lot, glad I have found it

Hi All, I just want to say thank you for the add. I own a corrado 1991 1.8 16v and thought I will share some pics of my pride and joy. Sorry about the quality of the pics, as they were taken off my phone. Cheers Bobby