Mrbaldhead

£350? Collection on wednesday?

Do you have the MAF connector plug that attaches to it, I don't need a MAF just the plug? Just wondering?

So I need a new MAF plug with the wires already attached, so if anyone has one please let me know as I need it ASAP. :)

Still can not understand how they are this bad! looks as if someone has taken a knife to them

Any ideas how to remove the wires from the plug? or shall I just get a new plug and re-attach wires?

Thanks guys, found a part and fitted it, hopefully that is the end of split pipes for a while... replaced 5 main ones now.

As pictured I need to buy this part, bought one the other day for £35 but it was oil damaged and swollen so after fitting it burst on first drive..... Help.

Okay, I will give that a go :) thank you for your ideas. If that doesn't work then I will take a new plug off you VAH-Hag.

..

Any clues as to where I can find the electronic connector that plugs in by the air filter? One wire has corroded so whole plug needs re-placing. Ian

VR6 Steering Wheel: http://www.ebay.co.uk/itm/252271678595?ru=http%3A%2F%2Fwww.ebay.co.uk%2Fsch%2Fi.html%3F_from%3DR40%26_sacat%3D0%26_nkw%3D252271678595%26_rdc%3D1 Original 1996 registered steering wheel from my VR6. Its in okay condition, pictures highlight the issues. - Pealing and light cracking at the top - Wear on Right side by hand position - Seem split on part of inside. - No centre cap for the horn. Looking at it in the drivers seat, it is passable but needs to be sold as stuck in my room now.. Open to offers

Has this sold?

How easy is this to flip around..... Time and effort wise??

Yeah they are good looking wheels! Ahhhh thats bad buddy, some people shouldn't be allowed on the roads!!

Will do that and report back. Oil is only around that join but looks like it goes higher in the pic.

Had all 4 done today, what an improvement for £240!! Ignore the disks - new pads and disks in the post :) Thoughts?

So during having my alloys refurbished today I had a look around the car....... and noticed this leak :( Its parked in the garage and has never left any oil on the floor so must be a recent leak and its not dripping only wet. My knowledge in this is poor so what do people think? Does it need taking to bits and new sump gasket?

Original 1996 registered steering wheel from my VR6. Its in okay condition, pictures highlight the issues. - Pealing and light cracking at the top - Wear on Right side by hand position - Seem split on part of inside. - No centre cap for the horn. Looking at it in the drivers seat, it is passable but needs to be sold as stuck in my room now.. Open to offers :)

issues... one busted ball joint

My VR6 is on Gaz coil-overs and has been lowered but not by much. On full lock the bottom ball joints rub on the inside of the alloy wheels..... It seems the previous owner has flipped the anti-roll bars upside down to attempt to combat this issue but it is still awful getting round tight turns or small hill turns on full lock! Lots of grinding. If I removed the anti-roll bar (Front) would it effect handling/ body roll?? Has anyone else had similar issues or got rid of the roll bar all together? Advice please.....

Thanks :) managed to source one from an amazing guy who luckily is passing by this sunday! saved the day

My Corrado VR6 has split the hose (Radiator upper)at the join to the adjacent smaller pipe. I need to locate a new/used one pretty sharpish as need the car for sunday :( Any help would be appreciated either to find the part online UK or if anyone has one for sale? Thanks, Ian

My Corrado VR6 has split the hose (Radiator upper)at the join to the adjacent smaller pipe. I need to locate a new/used one pretty sharpish as need the car for sunday :( Any help would be appreciated either to find the part online UK or if anyone has one for sale? Thanks, Ian

My Corrado VR6 has split the hose (Radiator upper)at the join to the adjacent smaller pipe. I need to locate a new/used one pretty sharpish as need the car for sunday :( Any help would be appreciated either to find the part online UK or if anyone has one for sale? Thanks, Ian [ATTACH=CONFIG]83010[/ATTACH]

Still for sale??