M15 VW

glad I could help :D

thanks :)

they have great corrado bits on there too :D Bits of trim etc

right, they can't give us an exact % as it depends what items you buy. When buying items :- make please in the basket of end of order before you take the order a text in the textfield with this slang "Please make discount for VW Corrado Forum". with regards to the discount: - An exact discount % is difficult. All OEM parts are in our shop a good price, but if a people order many products i can make a little discount for vw parts or OEM. If a people buy taillights or headlight and there are in our offer box, i can´t give a discount. If a people buy anything else ore tailligts and headlight ant this are not in our offer box i can make after or bevoe he take the order a offer. All People that will order in our system he can write to my mail [email protected] Attention: All enquiry to this email must be have inside the mail the complete adress for the offer. Also in this email a list of part what he need, so i can make in the moment a offer and send this to the email adress with .pdf format. I hope this is ok for you and our friends. I will every make the best for our customer! Might be best to email them first stating the corrado forum and what items you want so they can tell you what discount you will get. I hope this helps some of you out :) Nikki

well he has just agreed to a discount - just trying to work out an exact % for us :) From the sounds of it the discount will be for any item from them :)

hi everyone I have been speaking to a company about new RHD headlight lenses (they also do LHD ones). I am currently trying to get a discount for the forum so please do not buy any yet and I will keep you posted :D here are the links... G60 links... http://www.corrado-teile.de/shop/produc ... -RHD-.html http://www.corrado-teile.de/shop/produc ... -RHD-.html VR6 links... http://www.corrado-teile.de/shop/produc ... -RHD-.html http://www.corrado-teile.de/shop/produc ... -RHD-.html Nikki

well the overfuelling's still not fixed but Mr B is bringing the vagcom down

new radiator and fuel filter fitted.

bugger, thanks :)

Evening everyone does anyone know what MAF the v6 4 motion have? Is it a 4 pin and is the maf the same as the spec corrado 4 pin maf? thanks

our porsche seats will look fab when you have got them in! :D

hmm, just swapped the mafs over, taped up a few wires running to and from it and fired him up-started with alot less effort than before. Turned him off and on a few times and started every time. Is there anything else I need to keep an eye out for?

You can start him up first thing in the morning fine but if you drive for a few minutes and his temp is less than 90 and turn him off then turn him on again he struggles to fire up. It turns over but just wont catch. If you then leave him for five mins or so and try again then he fires up. What can I check re overfuelling? (He has had a new cold start sensor a few months ago aswell as a new lamda) help please

well they are painted black. No not for sale anymore.

thanks guys. I was going to get them banded so they were 7.5 at the front and 9 at the rear like the borbet a's but then realised I'm unlikely to have the money to do it anytime soon.

aw, thank you :D

The rear already has 5mm spacers on! But yes, they need spacing put more :)

what do you think?

oh dear :(

The hubby is swapping over the exhaust manifolds and front and rear engine mounts today for me. Also noticed that the downpipe was cracked too :lol: good thing we have a spare. He may also have found out what was causing Zed to throw a fit starting when you have only driven for a short time-two of the maf wires are bare. He will get some tape on them and we will see if it's done the trick.

aw thank you

It is such a subtle mod but makes the world of difference.

well it cracked before xmas but ive already got some of the parts. Im not annoyed or anything as I knew the mounts were on their way out and the radiator had seen better days-will just do it all in one go really.

well, Ive now cracked the exhaust manifold so will be changing both of them just to be on the safe side plus the front and rear engine mounts and the radiator has seen better days.

I had my arches done like this feb 07. They were pulled an inch each side but I wanted to keep the flat edge so it wasnt noticeable and didnt lose the lines but made all the difference when fitting wide wheels. I wonder where he got his idea from? :lol: do you have any pics of that job, mate? I sure do....