gollfy

Will the gear ratio's be the same, mine is an 8v

I have just aquired a corrado for my g/f, a 1995 2.0l 8V. However it used to be an automatic as per the log book. It has a manual gearbox at the mo but that is dead :( so I am after a replacement. I know car is all rigged up for a cable change gearbox but Im a little unsure what type of box to get. I want to keep it as standard as possible :roll: so dont really want to put a 16v rado one on and I think, may be wrong Mk3 golf gearboxes are lever and not cable change. I Know passats are cable change but what model to look for I dont know :?: Any help would be appreciated Thanks

Hi all, Just a quick one, whats the difference between early headlights 89-92 and late headlights 92-95? Only I have a late 92 G60 with facelift and there is some cheap one's I know off from a 90 H Reg rado :wink: Thanks all

Anybody know?? :(

Hi all, just a quick question to the peeps in the know I want to keep my 1992 G60 standard but can get some cheap black leather seats and cards :twisted: However I have the grey carpet and dash. Was the G60 available from VW with these options? ie Grey Carpet/Dash Black leather seats and cards Also whats the average price for a good set of leathers, non electric? Thanks all

mmmm prices definatly on the way up :twisted: http://cgi.ebay.co.uk/VOLKSWAGEN-CORRAD ... dZViewItem

Blue VR6 Going like the clappers down Pleasley Bypass near mansfield about 8:30am this morning :twisted: K82*EEC In my chip fat burning MK1 caddy diesel :oops: at the time

M56*BAV Tidy Black Corrado VR6 on Mansfield Road, Sutton In Ashfield near the hospital, was in my polo :cry: though so did not wave

Thanks for the advise :) Have to give it go, does not look an easy job to swop though :cry:

Do you suggest a new abs pump, I have checked connector that goes on to pump and its ok>

Abs light comes on after pulling off, plugged on and got the following fault code 00267 ABS OUTLET VALVE, FR-N100 Any idea's on where to start

The plus are located behind the centre console Any ideas guys?

Car is a G60 1992

Took my dashboard apart the other day and a few cables were loose, they went to this connector, put them back, does it matter which position they went back in, if so can somebody look at their car and tell me which way they go plzzzzzzz Thanks

Ahhhh :oops: thats where im going wrong!! Thanks :D

Is it the black adjuster in front of the motor? Like rectangle in shape? Had a go with tha but seems pretty tuff, dont wont to damage it

Hi all, I have a bootlid which I am stripping, however managed to strip everything off except spoiler mechanism and wiper motor. The spolier is down at the moment and I think I need it up to take the mechanism off. Any body know what wires to apply a voltage to to get it up.. Cheers All

Hi all. I have a 1992 G60 Corrado which I have had stood for a few months. before it was stood, the ABS light staid on Intermitantly. But now I have it back on the road its on all the time:(. I have cleaned all the sensors the best I can without taking them out cause it looks like you have to butcher them to get em out. But the light still stays on. Just wondered if anyone on here is near nottingham who has Vagcom with the 2x2 connection as mine is an older Corrado with the old connections who could kindly plug it on for me:). I know you can test the sensors using a multimeter and plugging that into the connections under the bonnet and rear seats, but is it just a voltage i am looking for to prove the sensor is working? Also I want some advise as Im interested in getting VAGCOM for myself as I have a laptop, just need the leads and software. Just wondered if you all could give me some advise on which particular lead and the best version of software to get and which is the most cost effective, want to get it up and running for a fair price. Thanks all for your time and help

I am trying to trace history of my C and have been given 2 dealer codes but the my local dealers cant tell me who they refer to. 2 Codes are: 131 341 Any help on this one gladly appreciated

Hello all, Have purchased a new spolier control unit so spoiler works automatically but I dont know where it is located. Can somebody tell me:) An easy one Im sure Thanks all

Planning on going to CCGB at york if any kind soul wants to take a peek for me then :lol: if I have not got it sorted by then. Just found a wiring diagram online (hurray) looks like spaghetti :shock:

The wire which has been put on to the fuel pump relay pin is an earth which is about 3ft long and is screwd onto frame behind centre console so my plan is to try and trace the original earth from behind the relay, from the fuse box to where it eventually goes to see if it's been messed about with in any way. Can see this being a real headache :( :( :(

Yes, it did have an old imoblilizer on at some point, have the paperwork for it. Going to have to try and find out where it goes :( :(

Had an electrician to swop the fuse box already and I have swopped the ecu so i can discount both of them

Tried about 3 different fuel pump relays and still the same :( :( :?: